User manual PANASONIC AW-E800E

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. For CANADA This Class A digital apparatus complies with Canadian ICES-003. [. . . ] Then, the camera operates in the selected use mode. s SETTING BY RCU (RCB) OR HYBRID CONTROL PANEL An operation mode is selected depending on the position of the scene file switch. Operation mode Scene File Switch Position of RCU (RCB) 1 2 3 Scene File Switch Position of Hybrid control panel 1 2 3 4 Halogen Mode Fluorescent Mode Outdoor Mode User's Mode USER SET CAMERA RCU (RCB) Hybrid Control Panel MENU ITEM/AWC YES/ABC NO/BAR SCENE FILE Switch SCENE FILE Switch -30- MENU ITEM SETTING s MENU ITEM SETTING · Each of the four use modes of the camera has a main menu. (Shown at right) · Each item of the main menu has a submenu, which consists of several settings. · These settings have been preset to the optimum values to suit each use mode, and can be changed to suit actual shooting conditions. · They can be set from the camera and RCU (RCB). They can also be set from the hybrid control panel using the switches, but the setting items are limited because the menu is not shown. Notes: · Composite signals are output from the video output regardless of the position ENC/VF of the RCU (RCB) user set switch. · [End] is displayed only in setting from the camera alone. · [Option Card Set] is shown only when an optional card is inserted. q MAIN MENU SCREEN Main Menu of Halogen, Fluorescent, Outdoor Mode **Halogen Mode Set** Brightness Set Color Set G/L, Color Bar Set Sharpness(DTL) Set Other Set (Option Card Set) Initialize Data (End) When the color bar signal is output from camera, "G/L, Color Bar Set" is displayed. **G/L Adjustment Set** H Phase (±0) SC Coarse ( 1) SC Fine (±0) Color Bar Set 7. 5IRE Main Menu of User Mode **User Mode Set** Iris, Shutter, Gain Set Color Set G/L, Color Bar Set Detail Set1 Detail Set2 Color Matrix Set Other Set1 Other Set2 (Option Card Set) Initialize Data (End) Return Blinking Use Mode -31- s SETTING 1. From the camera alone: Keep the MENU switch depressed for 5 seconds or more. From RCU (RCB): Set the user set switch in the pocket to the ON position. The main menu appears on the monitor screen. OFF: The light quantity is not adjusted automatically. ON: The light quantity is adjusted automatically. The maximum to which the gain can be increased using the auto gain up function is selected by the AGC maximum gain setting (1-6). Notes · In case of settings on the camera alone or when the iris switch on the RCU (RCB) is at [AUTO], the Auto Gain Up control may not operate if the lens iris switch is in the manual position. · When the AGC switch on the hybrid control panel is set to AGC, the Auto Gain Up control operates in the HIGH position. AGC Switch 6. AGC Maximum Gain [AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye L, N/Eye H] (AW-E750, AW-E655, AW-E650) [AGC Max Gain: 6dB, 12dB, 18dB, 24dB, N/Eye] (AW-E800E) This is used to set the maximum amount to which the gain can be increased when "ON" has been selected as the auto gain up setting (1-5). Manual Gain Up Control Setting [Manual Gain Up: 0 dB to 30 dB, N/Eye L, N/Eye H] (AW-E750, AW-E655, AW-E650) [Manual Gain Up: 0 dB to 30 dB, N/Eye] (AW-E800E) Manual setting is possible only when the Auto Gain Up control (1-5) is in the OFF position. 0 dB: 0 dB should be selected in normal cases. 1 dB to 30 dB: Use this range if sufficient video output cannot be obtained even when the lens iris is opened in shooting dark scenes. AW-E750, AW-E655, AW-E650 Night Eye L: Use this setting if it is not possible to achieve a satisfactory video output even at 30 dB. Night Eye H: Use this setting if it is not possible to achieve a satisfactory video output even at the Night Eye L setting. [. . . ] Zebra Level Setting [Level: 70% to 110%] This enables the zebra pattern to be displayed so that it will provide as a general guideline for the luminance level. It can be set when "ON" has been selected as the zebra indicator setting (<-1). Safety Zone Setting [Safety Zone: OFF, 1, 2, 3, 4, 5] This is used to select the type of safety zone which is displayed on the viewfinder. A safety zone is not displayed when "OFF" is selected. [. . . ]