User manual PANASONIC AW-E860

[. . . ] Convertible Camera AW-E860N Printed in Japan F0205Y0 D Before attempting to connect, operate or adjust this product, please read these instructions completely. VQTB0088 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. [. . . ] After adjustment set BAR/CAM switch back to CAM. · When horizontal phase adjustment is moved, color phase is also moved. Adjust color phase whenever horizontal phase adjustment is moved. -28- [ADJUSTMENT by CAMERA] 1. Press the NO/BAR switch for over 5 seconds for the color bar mode. Select [G/L Adjustment] on the main menu, then select [SC Coarse] on the sub menu. Make coarse adjustment with the YES/ABC switch and the NO/BAR switch. Use mode setting $ Use Mode Setting The camera has four use modes, and various functions for four use modes have been preset. Functions can be set as best suited to each use mode. · Halogen mode Suited to indoor shooting, such as at weddings, parties, lecture meetings, events, etc. Settings can be changed using a simple menu. · Fluorescent mode Suited to indoor shooting under fluorescent lighting. Settings can be changed using a simple menu. · Outdoor mode Suited to outdoor shooting. Settings can be changed using a simple menu. · User mode Settings can be changed using a detail menu. The blinking use mode comes into effect. After the use mode setting menu is shown for about 5 seconds, the camera returns to be ready for operation. Then, the camera operates in the selected use mode. Press the MENU switch, ITEM/AWC switch, or NO/BAR switch to let the desired use mode blink. MENU switch (A): The blinking item moves up by one. ITEM/AWC switch (S), NO/BAR switch (­): The blinking item moves down by one. $ Setting by camera 1. Turn the camera on while keeping the MENU switch depressed. The use mode setting menu shown at right appears on the monitor screen and one of the use mode blinks. -29- Use mode setting $ Setting by RCU (RCB) or hybrid control panel An operation mode is selected depending on the position of the scene file switch. Scene File Switch Scene File Switch Operation mode Halogen Mode Fluorescent Mode Outdoor Mode User's Mode Position of RCU (RCB) 1 2 3 USER SET Position of Hybrid control panel 1 2 3 4 CAMERA RCU (RCB) Hybrid control panel MENU ITEM/AWC YES/ABC NO/BAR SCENE FILE switch SCENE FILE switch -30- Menu item setting $ Menu item setting · Each of the four use modes of the camera has a main menu. [. . . ] ON: The zebra pattern is displayed on the viewfinder. Zebra Level Setting [Level: 70% to 110%] This enables the zebra pattern to be displayed so that it will provide as a general guideline for the luminance level. It can be set when "ON" has been selected as the zebra indicator setting. -52- The inside and outside frames denote safety zones of about 90% and about 95%, respectively. 4. EVF Output Setting [EVF Output: Y, CVBS] This is used to set the signals to be output to the viewfinder. [. . . ]