User manual PANASONIC AW-EX500N

[. . . ] 4 Precautions for use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Major operating controls and their functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 $ Analog signal input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Depending on the position of function setting switch 2 =, RGB, COMPONENT or YC analog video signals are output from pins #3, #4 and #5. It is also possible to set whether to add a SYNC signal to the RGB signals. The SYNC signal (4Vp-p) is output from pin #7. WV-CA9T5 can be used as the connecting cable. 1 2 3 4 5 6 7 8 9 Signal VIDEO GND RGB GND R/R-Y/C G/Y/Y B/B-Y VIDEO SYNC SYNC GND NC 2 RS-232C connector [RS232C] This enables RS-232C communication via the AW-EX500 between a PC or other device and a device which supports RS-232C communication and which is installed in the optional card slot or additional interface. The position for either the optional slot or additional slot must be selected using function setting switch 1 < for the other party to the communication. This connector cannot be used by AW-PB302, AW-PB304, AW-PB307, AW-PB309, AW-PB310 or AW-PB504. 3 SDI input connector [SDI IN] The SDI signals are supplied to this connector which is terminated internally by a 75 resistance. Connect 270Mbps signals which satisfy the SMPTE259M standard. Switch the input signal setting to SDI input using function setting switch 1 <. When the output of the AW-PB504 is connected, the maximum cable length is 200 or so meters which is equivalent to BELDEN 8281. Back of the connector -7- Major operating controls and their functions 4 Audio input connector [AUDIO IN] The audio signals are supplied to this connector. Input signals with a level of ­20dBV. The audio signals of the AW-PB310 can be supplied to it. This connector cannot be used by AW-PB302, AW-PB304, AW-PB307, AW-PB309 or AW-PB504. 5Analog video (Y/Y/VIDEO) input connector [Y/Y/VIDEO IN] The analog video signals are supplied to this connector which is terminated internally by a 75 resistance. Switch the setting to match the input signal using function setting switch 1 <. 6 Analog video (R-Y/C) input connector [R-Y/C IN] The analog video signals are supplied to this connector which is terminated internally by a 75 resistance. Switch the setting to match the input signal using function setting switch 1 <. 7 Analog video (B-Y) input connector [B-Y IN] The analog video signals are supplied to this connector which is terminated internally by a 75 resistance. Switch the setting to match the input signal using function setting switch 1 <. [. . . ] 1. 98 lbs (0. 9 kg) - 16 - 3-3/4" (96 mm) Specifications Power requirements: 12 V DC Power consumption: 6. 85 W indicates safety information. Input DC 12V power input connector 270Mbps SDI (BNC) (SMPTE259M standard-compliant) Only video data supported Analog composite (BNC) 1. 0Vp-p (0% setup level) Analog Y/C (BNC) Y: 1. 0Vp-p (0% setup level) (BNC) C: 0. 286Vp-p Analog component Y: 1. 0Vp-p (0% setup level) (BNC) (714/700mVp-p selectable by switch) (BNC) R-Y, B-Y: 756/525mVp-p (selectable by switch) Audio (stereo mini jack) ­20dBV, 1 k input impedance Output Analog composite Analog Y/C Analog component Analog RGB SYNC 1. 0Vp-p (0% setup level) Y: 1. 0Vp-p (0% setup level) C: 0. 286Vp-p Y: 1. 0Vp-p (0% setup level) R-Y, B-Y: 756mVp-p RGB: 0. 7Vp-p SYNC: 0. 3Vp-p (SYNC ON/OFF selectable by switch) 4Vp-p - 17 - Specifications Input/output interface: Operating temperature: Operating humidity: Dimensions (W!H!D): Weight: Switch/control functions: RS-232C 14°F to 113°F (­10°C to +45°C) 30 % to 90 % (without condensation) 3-5/16"!3-3/4"!6-1/8" [84!96!155 mm] Approx. 1. 98 lbs (0. 9 kg) · INPUT SEL1 · INPUT SEL2 · INPUT SEL3 · INPUT LEVEL Y · INPUT LEVEL R-YB-Y · RS232C SEL · PB302 OUT SEL (OPT) · PB302 OUT SEL (ADD) · OPTION I/F SEL · ADDITIONAL I/F SEL · D-SUB OUT SEL1 · D-SUB OUT SEL2 · RGB OUT SYNC SDI/ANALOG YR-YB-Y, YC/VIDEO YR-YB-Y/YC 714mV/700mV 756mV/525mV ADDITIONAL IF/OPTION IF YR-YB-Y/RGB YR-YB-Y/RGB PB302/PB310 PB302/PB310 YC/RGB, YR-YB-Y RGB/YR-YB-Y SYNC ON/SYNC OFF Weight and dimensions indicated are approximate. Specifications are subject to change without notice. - 18 - - 19 - PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W. , Los Angeles, CA 90068 (323) 436-3500 Government Marketing Department: 52 West Gude Drive, Rockville, MD 20850 (301) 738-3840 Broadcast PARTS INFORMATION & ORDERING: 9:00 a. m. [. . . ]