User manual PANASONIC AW-F575

[. . . ] 4 Major operating controls and their functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SDI card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Interface bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the SDI card . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 1 Interface bracket (AW-PB506A U02) . . . . 1 Accessories Adjuster plug (M6 M3) . . . . . . . . . . . . . . . . . . . . . . . . 1 Screws (6 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Screws (8 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - (E) - Installing the SDI card in a convertible camera (such as the AW-E50, AW-E650, AW-E655, AW-E750 and AW-E860) and mounting the camera on the interface bracket makes it possible for a viewfinder and/or inter-communications headset to be used and thus enable the camera to be used as a studio camera. In addition, there are two signal outputs for SDI signals compliant with EBU Tech. 67-E standard. Notes The AW-PB506A cannot be installed to the following models; AW-E00, AW-E00A, AW-E00S, AW-E600, AW-E800, AW-E800A, AW-RP605, AW-PB605 When the SDI card unit is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly in order to protect the environment. Characteristics Two signal outputs for SDI signals compliant with the EBU Tech. 67-E standard (BBC No. PSF1/M, BELDEN 881 or equivalent coaxial cable; max. 00 m) EDH (Error Detection and Handling) flags complying with the SMPTE RP165 standard can be added. (A switch can be used to enable or disable the addition of these flags. ) An inter-communications headset can be used and its volume adjusted. The STANDBY/ON switch function of the viewfinder (WV-VF65B, AW-VF80) is incorporated. Output signals (brightness and composite video signals) to the viewfinder can be switched using the menu settings. Loosen the 4 screws (8 mm) on the rear panel of the camera, then remove the panel itself. Loosen the screws (6 mm) on the optional card slot cover, then remove the cover. Align the SDI card with the guides and insert it. Ensure the card is fully inserted. 5 6 Firmly tighten the screws (6 mm) to the optional card slot. Firmly secure the rear panel with the 4 screws (8 mm). Note If the screws are misplaced, use the extra screws supplied with this product. - 7 (E) - Mounting the bracket on a tripod Mounting the viewfinder on a bracket 1 Mount the interface bracket on the tripod. (Screw: 1/4 ­ 0UNC) 3 Mount the mounting base that is supplied to the viewfinder onto the top of the interface bracket using the screws provided. (Mount the base securely so that it is not unsteady. ) Mounting base 2 screws 4 Mounting the camera 2 5 6 Slide the viewfinder onto the mounting base and tighten the fixing knob to secure it firmly. Connect the viewfinder cable to the EVF connector 1 or on the interface bracket. Connect the EVF I/F cable from the interface bracket to the EVF I/F connector on the SDI card. <WV-VF65B, AW-VF80, etc. > Fixing knob Mount the camera (in which the SDI card has been installed) on the interface bracket. Fasten the fixing knob to firmly secure the camera. Fixing knob Fixing knob <AW-VF64> - 8 (E) - ENGLISH Interface bracket mountings Connections When configuring a system with the remote control unit Convertible camera: AW-E50, AW-E650, AW-E655, AW-E750, AW-E860, etc. Viewfinder: WV-VF65B, AW-VF80, AW-VF64, etc. [. . . ] 00 m AC adapter: AW-PS505A Video monitor Cable provided with AC adapter Remote operation panel: AW-CB400, etc. 10BASE-T straight cable Cable provided with AC adapter AC adapter: AW-PS505A Control cable: AW-CA50T8G - 10 (E) - ENGLISH Connections Setting and changing of menu items Camera settings to match the system configuration and filming conditions can be made using the menu screens. See the convertible camera operating instructions for more information on the settings. For details on the setting procedures when the remote control unit and remote operation panel are used, refer to the operating instructions of the unit and panel. Performing the settings Main menu for user mode 1 Display the main menu. [. . . ]