User manual PANASONIC AW-HB505

[. . . ] Make sure to turn the power to the multi control hub off before connecting or disconnecting cables. O Avoid using the multi control hub outdoors. O Place the multi control hub a minimum of 1 meter away from monitor video screens. O Cleaning Unplug the multi control hub and wipe it clean using a dry cloth. [. . . ] <Note> In a system incorporating the AWRP301 or AW-RP305, the control panel is not equipped with a video signal cable compensation circuit. It may therefore be necessary to use a separate cable compensation device in some cases. 6 7 Controls and Their Functions 6 Black Burst Output [TO PAN/TILT HEAD HUB BLACK BURST OUT] (BNC Connector) This is the output jack for the reference signal generator built into the multi control hub. This signal may be used as the reference signal if the camera uses external synchronization. Connect this connector to the G/L signal input connector [G/L IN] of the pan/tilt head, or to the G/L signal input connector [TO CONTROL PANEL G/L IN] of the multi port hub using a coaxial cable (5C-2V equivalent). 7 Camera Control Output Connector [TO PAN/TILT HEAD HUB CAM CONT OUT] (BNC Connector) Connect this connector to the camera control signal input connector [CAMERA CONTROL IN] of the pan/tilt head, or to the camera control signal input connector [TO CONTROL PANEL CAMERA CONTROL IN] of the multi port hub using a coaxial cable (5C-2V equivalent). 8 Pan/Tilt Head Control Signal Input Connector [TO CONTROL PANEL PAN/TILT CONTROL IN] (RJ-45 8-pin Modular Jack) Connect this connector to the control panel pan/tilt control signal output connector [PAN/TILT CONTROL OUT] of the control panel using a 10BASE-T (UTP category 5) straight cable. 9 Preview Video Signal Output Connector [TO CONTROL PANEL PREVIEW OUT] (BNC Connector) Connect this connector to the video input connector [TO CAMERA PAN/TILT HEAD VIDEO IN] of the hybrid control panel (AW-RP501), or to the preview video input connector [PREVIEW IN] of the multi hybrid control panel (AW-RP505) using a coaxial cable (5C-2V equivalent). If the system incorporates a pan/tilt control panel (AW-RP301) or multi pan/tilt control panel (AW-RP305), the control panel is not equipped with a video input connector. If necessary, the output from the preview video signal output connector may be connected to a monitor video screen, VCR, or the like via a cable compensation device. Controls and Their Functions : Camera Control Signal Input Connector [TO CONTROL PANEL CAM CONT IN] (BNC Connector) Connect this connector to the camera control signal output connector [TO CAMERA PAN/TILT HEAD CAMERA CONTROL OUT] of the hybrid control panel (AW-RP501), or to the camera control signal output connector [TO CAMERA PAN/TILT HEAD CAMERA CONTROL OUT] of the multi hybrid control panel (AW-RP505) using a coaxial cable (5C-2V equivalent). If the system incorporates a pan/tilt control panel (AW-RP301) or multi pan/tilt control panel (AW-RP305), the control panel is not equipped with a camera control output connector. In this case, this connector should be left unconnected. If Camera cable: AW-CA50T15 Servo control zoom lens Pan/tilt head control Camera control Option switch control: Unnecessary if no optional unit is connected. Lamp control: Unnecessary if no halogen lamp is used. Gen-lock Video Multi port hub: AW-HB505 1 2 CABLE 2. Press AC adapter: AW-PS505 3 COMP 4 5 POWER OFF ON Y C Y C Y C Y C Y C OI Multl Port Hub AW-H8505 Preview Video DC15V Gen-lock Camera control Halogen lamp Multi control hub: AW-HB505 OI POWER OFF ON Pan/tilt head control AC adapter: AW-PS505 Preview color monitor (75 terminator) Contact Pan/tilt head AC adapter: AW-PS300 Optional unit Preview Video Multi hybrid control panel: AW-RP505 the button on the priority switchbox connected to the control panel you wish to operate. This activates the connected control panel. If the system incorporates a multi hybrid control panel, use the camera and pan/tilt head selector switch on the multi hybrid control panel to select a pan/tilt head. (The control panel is activated once its memory switch stops flashing and goes dark. ) <Notes> O Immediately after the power is turned on the system is in a status in which no control panel is selected. After turning the power on, do not fail to press the priority switchbox connected to the control panel you wish to operate. After this operation is performed the power supply to the camera and pan/tilt head turns on. O The active control panel is always the one connected to the priority switchbox pressed last. the mounting balance adjustment on the cameras. [. . . ] Set the limits to the range of movement AC adapter: AW-PS301 Camera control Pan/tilt head control Preview Video The adjustments and settings described in steps though above may be omitted if no changes need to be made to the current adjustments and settings. 3 6 16 17 Rack Mounting Example $ Rack Mounting Procedure Multi Control Hub To mount the multi control hub on a rack, use the supplied rack mounting brackets and mounting screws (M4a10). 1 Press the power switch to turn power off. 2 Remove the four feet from the bottom of the multi control hub. 3 Secure the rack mounting brackets to the sides of the multi control hub using the supplied mounting screws (a4). [. . . ]