User manual PANASONIC AW-LZ14ST55

[. . . ] Keep these operating instructions handy for future reference. 5) Do not use this apparatus near water. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] 8 Installing the studio card . . . . . . . . . . . . . . . . . . . . . 9 Interface bracket mountings . . . . . . . . . . . . . Mounting the camera . . . . . . . . . . . . . . . . . . . . . Mounting the viewfinder on a bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 10 10 10 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 When configuring a system with the remote control unit . . . . . . . 11 When configuring a system with the remote operation panel . . . . 1 Setting and changing of menu items . . . 13 Performing the settings . . . . . . . . . . . . . . . . . . 15 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Studio card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The AW-VF64 does not come with a standby function. 3 Inter-communications level control [LEVEL] This adjusts the sound level output to the inter-communications headset. -7- Major operating controls and their functions Interface bracket 5 EVF connector 1 [EVF1] The viewfinder (WV-VF65B, AW-VF80) is connected here. 6 EVF connector 2 [EVF2] The viewfinder AW-VF64 is connected here. Note Do not connect EVFs to EVF connectors 1 and (5 and 6) at the same time. 7 EVF cable This is connected to the EVF connector on the studio card. 8 TALLY input connector [TALLY IN] This is the tally control external input connector. OPEN : TALLY OFF SHORT : TALLY ON When using the AW-CB400 remote operation panel and AW-CA50T8G control cable for connecting to the convertible camera, connect the TALLY cable of the AW-CA50T8G to this connector. -8- Installing the studio card Always ask your local dealer to install the studio card. Before installing the studio card: Release the static carried in the body of the person to perform the installation. Installation can be performed more safely if an anti-static wrist strap is worn. Touching the card without first releasing this static may cause malfunctioning. Do not allow the metal part of the card come in contact with any other metal parts. Rear panel Optional card slot cover Studio card 2 screws 1/4" (6 mm) 4 screws 5/16" (8 mm) 1 2 3 4 Turn the power to the camera off and remove any cables which are connected to the power connector or other connectors. Loosen the 4 screws [5/16" (8 mm)] on the rear panel of the camera, then remove the panel itself. Loosen the screws [1/4" (6 mm)] on the optional card slot cover, then remove the cover. Align the studio card with the guides and insert it. -9- 5 6 Firmly tighten the screws [1/4" (6 mm)] to the optional card slot. [. . . ] When performing the settings with the convertible camera: Press the MENU switch continuously for at least 5 seconds. When performing the settings with the remote control unit (AW-RC600): Set the MENU switch to "ON". Main menu for halogen light mode, fluorescent light mode and outdoor mode The mode selected is displayed here. * "Option Card 2" is displayed on the menu when the optional card has been plugged into the optional card slot of the additional card box. Convertible camera MENU switch ITEM/AWC switch YES/ABC switch NO/BAR switch To return to filming mode (This is displayed when the convertible camera is used to perform the settings. ) Remote control unit (AW-RC600) MENU switch ITEM UP switch ITEM DOWN switch DATA YES/UP switch DATA NO/DOWN switch - 13 - Setting and changing of menu items 2 Select "Option Card 1" to display the submenu. When performing the settings with the convertible camera: Press the MENU or ITEM/AWC switch to move the flashing to the setting item, then press the YES/ABC switch to display the submenu. Y: Brightness signals are output to the viewfinder. [. . . ]