User manual PANASONIC AW-PB305

[. . . ] For CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la class A est conforme à la norme NMB-003 du Canada. FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] 10 10 10 10 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 When configuring a system with the remote control unit . . . . . . . 11 When configuring a system with the remote operation panel . . . 1 Setting and changing of menu items . . . 13 Performing the settings . . . . . . . . . . . . . . . . . . 15 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SDI card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Interface bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Configuration SDI card (AW-PB506A U01) . . . . . . . . . . . . . . . . . . . 1 Interface bracket (AW-PB506A U02) . . . . If the plug diameter does not match, use the adjuster plug (M6 M3) supplied with this product. MIC: Dynamic (With Preamp) 50 /­0 dB Receiver: 150 (max. 00 mW) 6 EVF standby / VIDEO ON/OFF switch [ST. BY / VIDEO ON/OFF] <For the WV-VF65B, AW-VF80> ST. BY: Places the viewfinder in standby mode. <For the AW-VF6> VIDEO ON: Outputs images to the viewfinder. VIDEO OFF: No images appear on the viewfinder. The AW-VF6 does not come with a standby function. 9 EVF I/F cable This is connected to the EVF I/F connector on the SDI card. TALLY input connector [TALLY IN] This is the tally control external input connector. OPEN: TALLY OFF SHORT: TALLY ON When using the AW-CB00 remote operation panel and AW-CA50T8G control cable for connecting to the convertible camera, connect the TALLY cable of the AW-CA50T8G to this connector. -8- Installing the SDI card Always ask your local dealer to install the SDI card. Before installing the SDI card: Release the static carried in the body of the person to perform the installation. Installation can be performed more safely if an anti-static wrist strap is worn. Touching the card without first releasing this static may cause malfunctioning. Do not allow the metal part of the card come in contact with any other metal parts. Rear panel Optional card slot cover SDI card 2 screws 1/4" (6 mm) 4 screws 5/16" (8 mm) 1 2 3 4 Turn the power to the camera off and remove any cables which are connected to the power connector or other connectors. [. . . ] Inter-communications headset Video monitor SDI monitor Use the RCU cable (AW-CA50A6) to connect the remote control unit to the convertible camera. Power to the camera is supplied from the remote control unit. Inter-communications headset Viewfinder: WV-VF65B, AW-VF80, AW-VF6, etc. SDI monitor SDI output Coaxial cable: BELDEN 881 [max. (00 m)] Convertible camera: AW-E350, AW-E650, AW-E655, AW-E750, AW-E860, etc. Video monitor Composite signals Coaxial cable Remote control unit (RCU): WV-RC700A, WV-RC550, AW-RC600, etc. Inter-communications headset RCU cable: AW-CA50A6 - 11 - Connections When configuring a system with the remote operation panel Convertible camera: AW-E350, AW-E650, AW-E655, AW-E750, AW-E860, etc. Viewfinder: WV-VF65B, AW-VF80, AW-VF6, etc. [. . . ]