User manual PANASONIC AW-PS600

[. . . ] 4 Trademarks and registered trademarks . . . . . . . . . . . . . . . . . . . . . . . . . 4 About copyright and licence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disclaimer of warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Network security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The function takes effect when "Auto" has been selected as the Contrast Mode, Gain or Frame Mix item setting. Return Use this to return to the previous menu. 42 Setting the menu items wwGenlock screen (AWHE50S only) Ge n l o c k Horizo n t a l P h a s e Subcar r i e r P h a s e Coars e Fine H Phas e . S C F i n e S t e p 0 90° 0 1 wwOutput screen Output Format Down CONV. Mode HDMI Color 1080i Squeeze YCbCr422 Return Return Format [1080i, 720p, 480i] Horizontal Phase [­206 to +49] This is used to adjust the horizontal phase during genlock. The video format is changed on this screen. For details on how to change the format, refer to "Changing the format" (page 45). Subcarrier Phase Coarse [0° to 315°] This is used to adjust coarsely the color phase during genlock. This setting is valid for the VBS signal output. Down CONV. Mode [Squeeze, SideCut, LetterBox] The downconversion mode is selected here. When the 4:3 aspect ratio has been set for the monitor screen, the images are squeezed horizontally and extended vertically changing the view of the angle. Subcarrier Phase Fine [­127 to +127] This is used to adjust finely the color phase during genlock. This setting is valid for the VBS signal output. SC Fine Step [1 to 10] This is used to select the amount by which the horizontal phase (Horizontal Phase) is to be adjusted and by which the color phase (Subcarrier Phase Fine) is to be adjusted finely. SideCut With the vertical height serving as the reference, the parts which extend beyond this at the two sides are cropped changing the view of the angle. Return Use this to return to the previous menu. When "On" is set, the panning and tilting operations will become slower in the zoom status. This function has no effect during preset operations. Focus Mode [Auto, Manual] "Auto" or "Manual" is set here for the focusing function. Auto: The subjects are always brought into focus automatically. Manual: The focus is operated manually. Preset Speed [1 to 30] There are 30 preset pantilt operation speeds of when regenerating the camera direction and other information which are registered in the preset memory. Focus ADJ With PTZ. [Off, On] "On" or "Off" is set here for the function which compensates for outoffocusing when it occurs during panning, tilting or zooming operations at the manual focus setting. When "Off" is set, adjust the focus as required after zooming or set the focus to the auto mode. This item can be selected only when "Manual" has been selected as the "Focus Mode" setting. Notes pw If a high value is selected for the Preset Speed setting, the image on the screen may shake when operation stops. pw When connecting the unit to the AWRP655 for use, the "DIAGONAL SPEED (P/T SETTING)" setting of the AWRP655 takes effect. To change the Preset Speed, change the AWRP655 setting. Return Use this to return to the previous menu. Preset Scope [Mode A, Mode B, Mode C] Selected here are the setting items to be recalled when the contents of the preset memory are regenerated. Mode A: Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain, WhiteBAL Mode B: Pan, Tilt, Zoom (including digital zoom), Focus, Iris Mode C: Pan, Tilt, Zoom (including digital zoom), Focus 46 Setting the menu items wwOther 2/2 screen Ot h e r 2 / 2 Tally E n a b l e Enable OSD Of f W i t h T a l l y Off OSD St a t u s Off Wirele s s C o n t r o l Enable p When menu operations cannot be performed using other control devices: 1. Turn off the power of the units and devices that are connected. [. . . ] 3 Click "Adjust font size (DPI)". 4 Click the [Continue] button on the "User Account Control" window. 5 Click "Default scale" on the "DPI Scaling" window, and restart the PC. (Refer to the screenshot. ) qwRestrictions Restriction 1 When two browser windows are open and one is being displayed on another The back window may come to the front when the mouse pointer is placed. [. . . ]