User manual PANASONIC AW-SW350

[. . . ] Live Switcher Model No. AW-SW350P Live Switcher AW-SW350 POWER ON WH1 WH2 SF1 WH3 SF2 AUTO TAKE KEY AUTO WIPE PATTERN TRANSITION TIME OFF A SF0 YLW CYN INT GRN FRZ GAIN INCOM MWR KEY CLIP MGT RED BLE INV SOURCE KEY AUTO LEVEL GEN-LOCK PHASE H SC SC FINE SETTING COLOR IN5 N N/R R FMEM FRZ A MIX WIPE 5 1 2 3 4 FMEM BLACK COLOR BAR AUTO TAKE B B Before attempting to connect, operate or adjust this product, please read these instructions completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC Note: This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] By transferring image data from a personal computer to the frame memory, the images and text created by the user can be output. For details, refer to the page on which image transfer is described. r BLACK/COLOR/BAR Selector Switch [BLACK/COLOR/BAR] This is used to select BLACK (black level signal), COLOR (color background) or BAR (color bar). When COLOR is selected, one of nine colors can be selected. For details on how to select the color, refer to the section on "T Color Background Color Selector Switch [COLOR]". A 100% white signal is output at the factory setting. SOURCE: Note Follow the procedure below to keep the key synthesis on the PVW screen at the OFF setting at all times. Press both the SETTING Button R and COLOR Button T at the same time. With the two buttons in step 1 held down, press the KEY AUTO Button. To turn the key synthesis on the PVW screen back to the ON setting, repeat the same steps. The KEY AUTO Button lamp will then go off. O Intercom Jack [INCOM] Connect an intercom headset to this terminal. Use the recommended headset (made by Ashida Onkyo MT-12MFB-03). P Intercom Volume [INCOM LEVEL] To adjust the volume of the headset speaker connected to Intercom Jack O. Turning it counterclockwise decreases the volume, and turning it clockwise increases it. { Genlock Phase Controls [GEN-LOCK PHASE] Connect a signal generator or other such instrument to GLIN/BBOUT D, and use these controls to adjust the phase when genlock is to be initiated. These controls need not be adjusted when genlock is not going to be initiated. H: This is used to adjust the horizontal sync phase. SC: This is used to adjust the subcarrier phase coarsely. SC FINE: This is used to adjust the subcarrier phase finely. 12 13 t Mix Switch [MIX] Press it to switch the signal selected with A-Bus Input Selection Switch } to the signal selected with B-Bus Input Selection Switch q or vice versa by the mix effect. y Wipe Switch [WIPE] Press it to switch the signal selected with A-Bus Input Selection Switch } to the signal selected with B-Bus Input Selection Switch q or vice versa by the wipe effect. The switch lights when WIPE is selected. u Auto Take Switch [AUTO TAKE] This switch is used for automatically wiping or mixing instead of performing these operations manually using the Fader Lever i. This switch becomes operational when the Fader Lever i is set all the way toward the A or B side, and when it is pressed once, the wipe or mix operation is performed automatically. [. . . ] qCarefully read the manuals for the individual devices connected to the Live Switcher. qUse coaxial cable to connect video and genlock signals. sCONNECTION FOR EXTERNAL SYNCHRONIZATION (Frame Synchronizer OFF) qAdjust the horizontal and color phases of the cameras. (Read the manual for the camera. ) Camera VIDEO OUT sCONNECTION WITHOUT EXTERNAL SYNCHRONIZATION (Frame Synchronizer ON) Convertible Camera AW -- E600 G/L IN Caution When unstable video signals, such as those from a VCR, are being used for the input signals, the internal frame synchronizer may not operate correctly. Convertible Camera AW -- E600 Camera VIDEO OUT Convertible Camera AW -- VIDEO OUT E600 G/L IN Color monitors PVW OUT PGM OUT Convertible Camera AW -- E600 Convertible Camera AW -- E600 Camera or character generator for key synthesis VIDEO OUT G/L IN BBOUT GLIN /BBOUT PVW OUT PGM OUT 2 1 5 4 VIDEO 3 2 1 IN TALLY & INCOM 75 AUTO OUT Y / C IN Convertible Camera AW -- E600 VIDEO OUT Color monitors Convertible Camera AW -- OUTPUT INPUT INPUT A OUTPUT A OUTPUT B E600 PVW OUT PGM OUT 5 4 3 2 1 1 1 DC 12V IN SET UP 1234 USB EXT TAKE PGM Y/C OUT Camera or character generator for key synthesis THR SEP 2 75 HI-Z B 2 3 3 AC adaptor AW-PS505 GND 5 4 3 2 1 VIDEO OUT Video distributor WJ-300C BBOUT GLIN /BBOUT PVW OUT PGM OUT 2 1 5 4 VIDEO 3 2 1 IN AW-SW350 Convertible Camera AW -- E600 VCR, etc. QFS switch [OFF] WGLIN/BBOUT switch [BBOUT] Signal generator When a signal generator is used to generate the reference signals for the system TALLY & INCOM 5 4 3 2 1 75 AUTO OUT Y / C IN DC 12V IN SET UP 1234 USB EXT TAKE PGM Y/C OUT AC adaptor AW-PS505 GND 5 4 3 2 1 AW-SW350 VCR, etc. QFS switch [ON] WGLIN/BBOUT switch [GLIN] 32 33 sCONNECTION TO PERSONAL COMPUTER Camera VIDEO OUT Convertible Camera AW -- E600 Convertible Camera AW -- E600 VIDEO OUT Convertible Camera AW -- E600 Color monitors OUT Windows PC Camera or character generator for key synthesis VIDEO OUT Convertible Camera AW -- E600 BBOUT GLIN /BBOUT PVW OUT PGM OUT 2 1 5 4 VIDEO 3 2 1 IN TALLY & INCOM 5 4 3 2 1 75 AUTO OUT Y / C IN DC 12V IN SET UP 1234 USB EXT TAKE PGM Y/C OUT Connected with USB cable AC adaptor AW-PS505 GND 5 4 3 2 1 AW-SW350 VCR, etc. These switches operate whether the FS switch is in the ON or OFF position. 34 35 sEXAMPLE FOR THE CONNECTION WITH PAN/TILT HEADS AND CONTROL PANEL qThe cameras can be locally controlled by using the pan/tilt head AW-PH300A, multi-hybrid control panel AW-RP505, and multi-port hub AW-HB505. Pan/tilt head cameras 1 to 4 E600 To pan/tilt head AW-PH300A, Camera AW-E300/E600/E800A Convertible Camera AW -- Multi-port hub AW-HB505 Convertible Camera AW -- E600 TO C A M E R A PA M / T I LT H E A D VIDEO IN PAM/TILT CONTROL OUT G/L OUT S-VIDEO OUT G/L OUT VIDEO IN PAM/TILT CONTROL OUT S-VIDEO OUT G/L OUT VIDEO IN PAM/TILT CONTROL OUT S-VIDEO OUT G/L OUT VIDEO IN PAM/TILT CONTROL OUT S-VIDEO OUT G/L OUT VIDEO IN PAM/TILT CONTROL OUT S-VIDEO OUT G/L IN PAM/TILT CONTROL IN PREVIEW OUT TO C O N T R O L PA N E L VIDEO OUT CAMERA CONTROL OUT CAMERA CONTROL OUT VIDEO OUT CAMERA CONTROL OUT VIDEO OUT CAMERA CONTROL OUT VIDEO OUT CAMERA CONTROL OUT VIDEO OUT CAMERA CONTROL IN DC12V IN Color monitors Convertible Camera AW -- 5 4 3 2 1 SEE MANUAL E600 VIDEO IN 1-4 VIDEO OUT 1-4 Preview monitor AC adaptor AW-PS505 PVW OUT PGM OUT Camera or character generator for key synthesis VIDEO OUT G/L IN BBOUT GLIN /BBOUT PVW OUT PGM OUT 2 1 5 4 VIDEO 3 2 1 IN TALLY & INCOM 5 4 3 2 1 75 AUTO OUT Y / C IN G/L OUT G/L IN G / L IN PREVIEW MONITOR OUT DC12V IN Convertible Camera AW -- E600 TD M U LT I PORT HUB AUX CONTROL IN TALLY PA N / T I LT CAMERA CONTROL OUT CONTROL OUT G/L OUT PREVIEW IN 5 4 3 2 1 DC 12V IN SET UP 1234 USB EXT TAKE PGM Y/C OUT Multi-hybrid control panel AW-RP505 2 1 AC adaptor AW-PS505 GND 5 4 3 AC adaptor AW-PS301 AW-SW350 VCR, etc. The FS switch may be in either the ON or OFF position. If high picture quality is desired, set the FS switch to OFF and adjust each camera for horizontal and color phases. [. . . ]