User manual PANASONIC BQ-390A

[. . . ] The priority of operation is placed on the first unit that turned on. € During operation, HEAT and COOL modes cannot activate at the same time for different indoor units. € The power indicator blinks to indicate the indoor unit is standing by for a different operation mode. Outdoor unit Operation conditions Use this air conditioner under the following temperature range. [. . . ] Prevent electric shock by switching off the power supply: - Before cleaning or servicing, - When extended non-use, or - During abnormally strong lightning activity. Do not use for preservation of precise equipment, food, animals, plants, artwork or other objects. this may cause quality deterioration , etc. Do not use any combustible equipment in front of the airflow outlet to avoid fire propagation. do not expose plants or pet directly to airflow to avoid injury , etc. Do not touch the sharp aluminium fin, sharp parts may cause injury. Do not switch ON the indoor unit when waxing the floor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not dismantle the unit for cleaning purpose to avoid injury. Do not step onto an unstable bench when cleaning the unit to avoid injury. Press and hold the button until you hear 3 beeps, then release to use in forced HEAT mode. POWER (Green) TIMER (Orange) POWERFUL (Orange) QUIET (Orange) AIR SWING (Orange) AUTO 6 FAN SPEED To select fan speed To set the timer To turn ON or OFF the unit at a preset time. 1 2 3 MANUAL SET 2 3 (Remote control display) TIMER ON 1 OFF CANCEL AUTO AIR SWING To adjust vertical airflow direction 2 Set the time OFF MANUAL OFF TIMER AIR SWING AUTO • Keeps the room ventilated. • In COOL/DRY mode , if AUTO is set , the louver swings up/down automatically. € In HEAT mode, if AUTO is set, the horizontal louver is fixed at the predetermined position. MANUAL • The airflow direction can be adjusted as desired by using remote control. 2 OFF TIMER 3 Confirm SET OFF TIMER TIMER • To cancel ON or OFF timer , press or OFF then press CANCEL . € When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. € Timer operation is based on the clock set in the remote control and repeats daily once set. for clock setting , please refer to Quick guide. € If timer is cancelled manually or due to power failure, you can restore the previous setting SET . [. . . ] € Wash/rinse the air filter gently with water to avoid damage to the air filter surface. € Do not dry the part with a hair dryer or a stove. • Replace any damaged air filters. For seasonal inspection after extended non-use • Checking of remote control batteries. [. . . ]