User manual PANASONIC BT-H1700BP

[. . . ] Operating Instructions Multi-Format Monitor Model BT-H1700BP MUTING DEGAUSS UNDER SCAN PULSE CROSS COLOR OFF SLOT 1 SLOT 2 SLOT 3 POWER A VOLUME MENU BLUE CHECK ASPECT AREA MARKER B C D E F INPUT SELECT Before attempting to connect, operate or adjust this product, please read these instructions completely. Printed in Japan VQT0G67-1 LCT1464-001B 1003-MK-MW-VP P SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions. WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. [. . . ] HALF+L: The area of the specified screen ratio is indicated by an outline, and the area outside of that is displayed as a 50% transparency. : The area outside the specified screen ratio is black. Only the portion of the picture within the designated area is displayed. BLK. +L : The area of the specified screen ratio is indicated by an outline, and the area outside of that becomes black so that only the area inside the line is displayed. SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. Press the button to display the setting menu illustrated on the right. <SLOT CONDITION> INPUT INPUT INPUT INPUT INPUT INPUT A B C D E F : : : : : : VIDEO-1 VIDEO-2 COMPO. RGB NO SLOT NO SLOT EXIT: MENU INPUT A/INPUT B : Status of SLOT1 INPUT C/INPUT D : Status of SLOT2 INPUT E/INPUT F : Status of SLOT3 VIDEO-1/VIDEO-2 : With VIDEO input card is installed. COMPO. /RGB : With Component/RGB input card is installed. SDI-1/SDI-2 : With SDI input card is installed. HDSDI-1/HDSDI-2 : With HD SDI input card is installed. NOTES: · If an input card is compatible with EMBEDDED AUDIO, an asterisk (*) is displayed its name. (Example: HDSDI-1*) · The "--" indication may appear. This means that no signal is input to the corresponding INPUT, either because no input card is installed or because the input card only has a single input line. 7 ZOOM/R-ZOOM Zooms the center of the marked area. OFF: Does not zoom. ON : Zooms. NOTES: · Does not function when under-scan is operated. · To adjust the zoom picture size, refer to "ZOOM H. SIZE" on page 19. 7 ASPECT SELECT/R-ASPECT SELECT Selects the screen aspect ratio. · 4:3/13:9/14:9 sub menu POSI. Selects the display position of the sub menu superimposed on the screen. For details, refer to "To change the position of the sub-menu display" on page 12. 4:3 14:9 13:9 14 7 SAFETY MARKER/R-SAFETY MARKER Displays dotted lines to indicate the areas corresponding to 80%, 88%, or 90% of the screen size (the aspect ratio setting in "ASPECT SELECT/RASPECT SELECT"). OFF : 90% : 88% : 80% : SAFETY MARKER does not function. Marked area is 90% of the 16:9 screen ratio. Marked area is 88% of the 16:9 screen ratio. Marked area is 80% of the 16:9 screen ratio. 7 SELECT Selects the picture matrix standard. ITU601 or ITU709 : Standard setting MANUAL : Manual setting NOTE: The following items are displayed when MANUAL is selected. When ITU601 or ITU709 is selected, they are not displayed. 7 R-Y PHASE Sets the R-Y phase. · 90/92/94/112 NOTES: · When a picture of 4:3 aspect ratio is input, SAFETY MARKER for 4:3 screen is displayed. · To display SAFETY MARKER for 16:9 screen ratio when a picture of 16:9 aspect ratio is input, set "MARKER SELECT/R-MARKER SELECT" to OFF. (In this case, setting of ASPECT SELECT is invalid. ) 7 R/B GAIN Sets the R/B gain. · 0. 86/0. 56/0. 68/0. 79 7 G-Y PHASE Sets the G-Y phase. · 244/253/236/240 COLOR MATRIX Selects or adjusts the standard of the color demodulation (color rendering). Press the button to display the setting menu illustrated on the right. <COLOR MATRIX> 7 G/B GAIN Sets the G/B gain. · 0. 30/0. 34/0. 40/0. 45 R-Y PHASE ITU601 R/B GAIN G-Y PHASE G/B GAIN 90 0. 79 244 0. 45 90 0. 86 244 0. 30 : MANUAL : 90 : 0. 86 : 244 : 0. 30 SELECT R­Y PHASE R/B GAIN G­Y PHASE G/B GAIN sub menu reset EXIT: MENU ADJUST: ­ + SELECT: The menu screen when MANUAL is selected. R-Y PHASE ITU709 R/B GAIN G-Y PHASE G/B GAIN · The standard setting is set to "ITU601" or "ITU709" depending on the input signal format. Input Signal Format Standard setting ITU601 ITU709 ITU709 Manual setting (MANUAL) NTSC, PAL, 480/60i, 480/60p, 576/50i, 575/50p 720/50p, 720/60p, 1080/50i, 1080/60i, 1035/60i, 1080/24psF 15 7 "SET-UP MENU" SCREENS SET-UP MENU <SET-UP MENU> FUNCTION SETTING PICTURE SUB ADJ. [. . . ] If this does not get rid of the lines, follow the procedure below. Display a white screen, so that the problem area can be seen clearly. Maximize the "CONTRAST" and "BRIGHT" adjustments, then place a bright white rectangle on the area. After a while, the lines should disappear. 24 7 SELF-CHECK INDICATIONS When the screen goes blank, and one or more of the INPUT SELECT A through F buttons on the front control panel start blinking. . . [. . . ]