User manual PANASONIC BTLH1760E

[. . . ] Operating Instructions LCD Video Monitor Model No. Model No. BT-LH1760P BT-LH1760E Before operating this product, please read the instructions carefully and save this manual for future use. F0308T0 -P D Printed in Japan ENGLISH VQT1R47 Read this first !(for BT-LH1760P) CAUTION: In order to maintain adequate ventilation, do not install or place this unit in a bookcase, built-in cabinet or any other confined space. To prevent risk of electric shock or fire hazard due to overheating, ensure that curtains and any other materials do not obstruct the ventilation. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: This apparatus can be operated at a voltage in the range of 100 - 240 V AC. [. . . ] 80% Area marker 88% Area marker (Displayed for HD input and SD input in 16:9 ratio mode. ) This marker is displayed as a dotted line. VISTA marker CNSCO marker The marker is displayed as a vertical dotted line when "UNDER" is selected under "SCAN" in the "VIDEO CONFIG" menu. 95% Area marker 93% Area marker TYPE1 Vertical 89%, horizontal 88% TYPE2 Vertical/Horizontal 88% VISTA marker CNSCO marker 90% Area marker 88% Area marker Area marker This marker is displayed as a dotted line. TYPE1 Vertical 93. 1%, horizontal 93% TYPE2 Vertical/Horizontal 93% 95% Area marker 93% Area marker TYPE1 Vertical 89. 5%, horizontal 88% TYPE2 Vertical/Horizontal 88% 80% Area marker * You can display the 4:3 marker and the 16:9 marker simultaneously. Simultaneous display example The section becomes the "MARKER BACK". It controls the background of the marker selected with a 16:9 ratio. 16:9 marker: 95% area marker 4:3 marker 4:3 marker: 16:9 marker 80% area marker Center marker Center marker This marker is displayed at the center of the screen. 90% Area marker 88% Area marker 80% Area marker 19 Main Menu (continued) VIDEO CONFIG Underlined values indicate factory defaults. Sub menu GAMMA SELECT*1*2 Settings STANDARD FILM STDIO/PST Description Selects gamma curve. <STANDARD> Standard mode <FILM> Film mode <STDIO/PST> Color emphasis mode (a mode that approximates CRT display capability suitable for studio or postproduction application) The mark appears at the top left of the screen when "FILM" is selected. <VARICAM> For VARICAM use <OTHER> Other Selects color temperature. <USER 0 - 63> Adjustable settings 0 - 63 (equivalent to a color temperature range of 3, 000 - 9, 300K) <D93> Equivalent to a color temperature of 9, 300K <D65> Equivalent to a color temperature of 6, 500K <D56> Equivalent to a color temperature of 5, 600K <VAR1> WB adjustment mode*4 <VAR2> WB adjustment mode*4 *4 <VAR3> WB adjustment mode Selects the width of outline correction edge. <HIGH> Thin edge <LOW> Wide edge Sets horizontal outline correction. The item display moves to the lower part of the screen during adjustment. The item display moves to the lower part of the screen during adjustment. ( page 21, "IP mode") <MODE2> Inter-field interpolation <MODE1> Inter-frame interpolation Switches between color and monochrome (MONO). <OFF> Color <ON> Monochrome * When ON, the CHROMA setting of the picture adjusting knob is fixed at 0. With an Anamo lens and SDI 720/60P, 59. 94P input, the picture is resized to Anamo magnification (the vertically enlarged signal can be vertically compressed and corrected for display). Sets the aspect ratio for SD signal input. <4:3> 4:3 display <16:9> 16:9 display Sets under-scan and normal display. <NORMAL> Normal display <UNDER> Under-scan FILM GAMMA*2 COLOR TEMP. VARICAM OTHER USER0 - 63*5 D93 D65 D56 VAR1 VAR2 VAR3 SHARPNESS MODE*2 SHARPNESS H*2 SHARPNESS V*2 I-P MODE*2*6 HIGH*3 LOW 0 - 30*3 0 - 30*3 MODE2 MODE1 OFF ON OFF ON 4:3 16:9 NORMAL UNDER MONO*2 ANAMO*2*7 SD ASPECT*2 SCAN*2 *1 In split-screen display, changes are not reflected to the still image in the main window. *2 These functions are not available when "RGB-COMP. " under "YPBPR/RGB" or "DVI-COMP. " under "DVI-D" is selected in the "INPUT SELECT" menu ( page 30). *3 The following sharpness values are available and the settings for the selected input signal is displayed. Adjustment status during selection appears at the bottom right of the screen. 1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0) 2) HD for any other input (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H/V: 0). 3) SD for any other input (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0). [. . . ] Any moisture entering the monitor could damage it. 41 Specifications General Input power AC: DC: Power supply: 100 V - 240 V, 50/60 Hz 12 V (11 V - 17 V) is the safety information. Dimensions: · Including stand 430 (W) mm × 323. 5 (H) mm × 198 (D) mm [16 15/16 (W) inches × 12 3/4 (H) inches × 7 13/16 (D) inches] · Main body only, not including stand 430 (W) mm × 309 (H) mm × 81. 1 (D) mm [16 15/16 (W) inches × 12 3/16 (H) inches × 3 3/16 (D) inches] Mass: · Including stand 7. 1 kg (15. 7 lb) · Main body only, not including stand 6. 2 kg (13. 7 lb) Operating temperature: +5 °C to +35 °C (+41 °F to +95 °F) Operating humidity: 20 % to 80 % (no condensation) Storage temperature: -20 °C to +60 °C (-4 °F to +140 °F) Panel Size: Aspect ratio: Number of pixels: Display colors: View angle: Power consumption: 0. 6 A - 0. 3 A 4. 0 A Signal level VIDEO EXT SYNC signal level: HD/VD signal level: AUDIO AUDIO input level: Speaker output: Headphone output: 0. 3 Vp-p to 4. 0 Vp-p TTL level 0. 5 Vrms 0. 5 W + 0. 5 W 32 , level adjustable SDI embedded audio HD-SDI: SMPTE299M compatible Sampling rate: 48 kHz, synchronous/asynchronous 8 ch SD-SDI: SMPTE272M compatible Sampling rate: 48 kHz, synchronous 4 ch Standard accessories <For BT-LH1760P> Operationg instructions × 1 Warranty (Card) × 1 Power cord × 1 Power cord hook × 1 Screw × 1 <For BT-LH1760E> Operationg instructions × 1 AC mains lead × 2 AC mains lead hook × 1 Screw × 1 Optional units Rack Mount Adaptor BT-MA1710G Wall Mount Adaptor BT-WMA17G Protection Panel BT-PRP17G 17. 0 type 15:9 1280 × 768 (WXGA) Approx. 16, 770, 000 colors 176° up/down, 176° right/left Input/output Connectors Image signal input: VIDEO: 1 line, BNC × 2 (1 connector with through-out configuration) Analog component: 1 line for YPBPR/RGBS, BNC × 8 (4 connectors with through-out configuration) However, when input is RGB-COMP. this becomes BNC × 5 (R, G, B, HD, and VD). [. . . ]