User manual PANASONIC BTLH2550E

[. . . ] Operating Instructions LCD Video Monitor Model No. Model No. BT-LH2550P BT-LH2550E DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Für Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM. Pour des explications en français, veuillez vous reporter au CD-ROM fourni. Per le istruzioni in italiano, vedere il CD-ROM in dotazione. [. . . ] Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. The item display moves to the lower part of the screen during adjustment. Both the main window and subwindow can be set up in the split-screen display of the "TWO WINDOW" function. COLOR SPACE SMPTE-C*7 EBU*7 ITU-709 WIDE1 WIDE2 WIDE3 COLOR TEMP. USER0 - 63*5 D93 D65 D56 VAR1 VAR2 VAR3 SHARPNESS MODE*2 HIGH*3 LOW SHARPNESS H*2 0 - 30*3 SHARPNESS V*2 0 - 30*3 *1 Changes are not reflected to a still image in the main window in the split-screen display of the "TWO WINDOW" function. *2 These functions are not available when "RGB-COMP. " under "YPBPR/RGB" or "DVI-COMP. " under "DVI-D" is selected in the "INPUT SELECT" menu ( page 36). The gamma curve is set to STANDARD when "RGBCOMP" or "DVI-COMP" is selected. Selecting WIDE1 to 3 for "COLOR SPACE" produces the gamma curve fixed to that "COLOR SPACE. " *3 The following sharpness values are available and the settings for the selected input signal is displayed. Adjustment status during selection appears at the bottom right of the screen. 1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0) 2) HD for any other input (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H/V: 0). 3) SD for any other input (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0). *4 Selecting "VAR1", "VAR2" and "VAR3" engages the WB adjustment mode ( page 28). *5 To select USER0 - 63, 1) Press [ENTER] ("USER" changes to blue). 2) Use [ , ] to select 0 - 63 and press [ENTER]. *7 Factory default setting: SMPTE-C (U. S. A. and Canada), EBU (other countries) 26 Main Menu (continued) Sub menu I-P MODE*2*6 Settings MODE2 MODE1 Description Selects IP conversion mode. ( page 27, "IP mode") Both the main window and sub-window can be set up in the split-screen display of the "TWO WINDOW" function. <MODE2> Inter-field interpolation <MODE1> Inter-frame interpolation Switches between color and monochrome (MONO). <OFF> Color <ON> Monochrome · When ON, the CHROMA setting of the picture/volume adjusting menu is fixed at 0. With an Anamo lens and HD-SDI input, the picture is resized to Anamo magnification (the vertically enlarged signal can be vertically compressed and corrected for display). This function is not available in the split screen display of the "TWO WINDOW" function. Sets the aspect ratio for SD signal input. This function is not available in the split screen display of the "TWO WINDOW" function. <4:3> 4:3 display <16:9> 16:9 display Sets under-scan and normal display. [. . . ] Remedy Turn off the power and then turn it back on. If the problem still persists, consult your dealer. 52 Specifications General Supply Voltage 24 V DC, 4. 5 A 5 V DC, 0. 03 A indicates safety information. Dimensions (W × H × D): 599 mm × 440 mm × 220 mm (23 - 5/8 inches × 17 - 5/16 inches × 8 - 11/16 incehs) (Including stand) 599 mm × 410 mm × 100 mm (23 - 5/8 inches × 16 - 1/8 inches × 3 - 15/16 incehs) (Not including stand) Mass: approx. 9. 7 kg (21 lb) (Including stand) approx. [. . . ]