User manual PANASONIC BT-LH80W

[. . . ] Operating Instructions LCD Video Monitor Model No. Model No. BT-LH80WP BT-LH80WE Before operating this product, please read the instructions carefully and save this manual for future use. S0507N0 -M Printed in Japan ENGLISH VQT1H75 Read this first!(For BT-LH80WP) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. FCC Note: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] WB adjustment mode You can adjust "WHITE BALANCE VAR1" - "WHITE BALANCE VAR3" (WB) by selecting "VAR1" - "VAR3" in "COLOR TEMP. " in the "VIDEO CONFIG" menu. The underlined values are factory preset setting values. Explanation Used to select the color temperature that will become the basis for adjustments. <USER 0 - 63>Adjustable settings 0 - 63 (color temperature around 3000K - 9300K) <D93> Color temperature around 9300K <D65> Color temperature around 6500K <D56> Color temperature around 5600K GAIN elements for RED are adjusted. 2 GAIN elements for GREEN are adjusted. 2 GAIN elements for BLUE are adjusted. 2 Sub menu COLOR TEMP. 1 Settings USER 0 - 63 D93 D65 D56 GAIN RED GAIN GREEN GAIN BLUE 0 - 511 (Factory presets are values for color temperature <D65>. ) The presets are values adjusted before shipment from factories. ­512 - 511 (Factory preset settings: 0) BIAS RED BIAS GREEN BIAS BLUE RESET BIAS elements for RED are adjusted. 2 BIAS elements for GREEN are adjusted. 2 BIAS elements for BLUE are adjusted. 2 "GAIN RED" - "BIAS BLUE" values are reset to color temperatures values selected in "COLOR TEMP. ". 1 When "COLOR TEMP. " is selected and [ENTER] is pressed following item change, the display changes to the confirmation screen. Selecting "YES" and pressing [ENTER] on this screen return GAIN and BIAS values to the selected color temperature values. 2 When adjusting, the item display moves to the lower part of the screen. 20 Main Menu (continued) SYSTEM CONFIG The underlined values are factory preset setting values. Settings BACKLIGHT CONTRAST Explanation Used to select the function to be assigned to CONT/B. LIGHT (a knob on the front panel). <BACKLIGHT> Used to adjust BACKLIGHT. <CONTRAST> Used to adjust CONTRAST. <Note> CONT. /BACK displays "-" while BACKLIGHT settings are performed. Used to select the function to be assigned to PEAK/PHASE (a knob on the front panel). <PEAKING> Assigns to the PEAKING function. <PHASE> Assigns to the PHASE function. Used to set the display time for the status display. <3SEC OFF> Displayed for 3 seconds. Used to select whether or not to display the battery level. Used to load the saved factory preset setting values (FACTORY) or user data (USER 1 - USER 5). <FACTORY> The factory preset settings. <USER1 - 5> The saved USER data 2. When the unit is shipped from the factory, the USER 1 to 5 data items are the same as the factory preset values. Up to 5 sets of user data can be saved, which include the current setting values for the menu and picture adjusting knobs. BACKLIGHT 0 - 60 PEAKING/PHASE PEAKING PHASE STATUS DISPLAY CONTINUE 3SEC OFF1 OFF OFF ON FACTORY USER1 USER2 USER3 USER4 USER5 USER1 USER2 USER3 USER4 USER5 LAST FACTORY USER1 USER2 USER3 USER4 USER5 BATTERY REMAIN SETUP LOAD SETUP SAVE PWR ON SETUP Used to select the settings for when the power supply is switched ON. [. . . ] Water or similar substances getting inside the monitor can cause a malfunction. Specifications GENERAL Power supply: DC 12 V (11. 0 V to 17. 0 V) Input current: 1. 5 A indicates safety information. Dimensions (W × H × D): Weight: Operating temperature: Operating humidity: Storage temperature: Panel Size: Aspect ratio: Number of pixels: Display colors: Angle of view: Input connectors VIDEO: Analog component (YPBPR): SDI: VF: GPI: RS-232C: 218 mm × 166 mm × 64. 7 mm (8-9/16 inches × 6-9/16 inches × 2-9/16 inches) 1. 5 kg (3. 3 lb) 0 °C to 40 °C (32 °F to 104 °F) 10 % to 85 % (no condensation) ­20 °C to +60 °C (­4 °F to +140 °F) 7. 9-inch V (Effective display area) Panel: 16:9 (Effective display area) Panel: 800 × 450 (Effective display area) Approx. 16. 77 million colors Top-bottom direction: 110 ° Left-right direction: 120 ° 1 line, BNC × 1 (Shared with the analog component Y input terminal) 1 line, BNC × 3 (Of these, the Y input terminal is shared with the VIDEO input terminal) 1 line, BNC × 1 (Optional) D-sub, 15 pins × 1 D-sub, 9 pins × 1 D-sub, 9 pins × 1 36 Specifications (continued) List of compatible signal formats ( : Compatible, Input signal formats NTSC PAL 480/59. 94i 480/59. 94P 576/50i 576/50P 720/50P 720/59. 94P 720/60P 1035/59. 94i 1035/60i 1080/23. 98PsF 1080/24PsF 1080/50i 1080/59. 94i 1080/60i 1 When 1035/59. 94i signal is input, displayed as 1080/59. 94i. Other various marker displays will use the 1080/59. 94i marker. [. . . ]