User manual PANASONIC CA-TU7000U

[. . . ] ® AV Control Unit with Receiver Unité de commande AV avec récepteur Unidad de control de audio-vídeo con receptor CA-TU7000U Operating Instructions Manuel d'instructions Manual de Instrucciones ¡Please read these instructions carefully before using this product and save this manual for future use. ¡Prière de lire ces instructions attentivement avant d'utiliser le produit et garder ce manuel pour l'utilisation ultérieure. ¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. E N G L I S H Safety Information Radio Frequency Interference Statement (Part 15 of the FCC Rules): Applies only in U. S. A. This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 of the FCC Rules. ¡These limits are designed to provide reasonable protection against harmful interference in an automobile installation. [. . . ] ¡The display returns to the previous one if there is no operation for more than 60 seconds after changing to the setting / adjusting menu. [}] [{] []] [[] (Select) [ENTER] [MODE] 1 2 3 E N G L I S H 28 CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [}] [{] []] [[] (Select) DISC/BAND 4 7 5 8 6 9 [MENU] A 0 VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE [ENTER] BEEP OFF ON Beep Setting : Operation sound (Beep) OFF : Operation sound (Beep) ON Note: The loud beep is energized when opening or closing the display unit even if you select OFF for the beep setting. VIDEO-CONT VTR1 VTR2 Video Control Setting : Connected to the VTR1-IN : Connected to the VTR2-IN Note: Select a terminal connected to the DVD output terminal of a Panasonic car navigation system with a built-in DVD player (not available yet) through an RCA cord. OFF ON : No use of MAIN-IN (front/rear) terminal : Use of MAIN-IN (front/rear) terminal Note : Be sure to select "OFF" when you do not connect a digital surround processor (CY-AC300). If you select "ON", sound does not come from the speakers. CA-TU7000U 37 E N G L I S H 29 Display Settings 1 Press [MENU] to display the main menu. 2 q Press [[] or []] to select "SCREEN". w Press [ENTER] to set. [MENU] CY-VMC7000U [MODE] DISC/BAND CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [}] [{] []] [[] (Select) DISC/BAND VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT VOLUME ENTER TRACK/ YUNE NAVIGATION ASPECT NAVI ASP P·MODE MUTE MENU MODE POWER NAVI ASP P·MODE ENTER TRACK/ YUNE [ENTER] Dimmer Default : AUTO Select DIMMER Contrast Default : ± 0 Setting range : - 15 to + 15 Select CONTRAST Brightness Default : ± 0 Setting range : - 15 to + 15 Select Select SCREEN BRIGHT Color Default : ± 0 Setting range : - 15 to + 15 Select COLOR Tint Default : ± 0 Setting range : - 15 to + 15 Select TINT 38 CA-TU7000U 3 Press [[] or []] to select and adjust. Notes: ¡Press [MODE] to return to the regular mode. ¡The display returns to the previous one if there is no operation for more than 60 seconds after changing to the setting / adjusting menu. [}] [{] []] [[] (Select and Adjust) [ENTER] [MODE] 1 2 3 E N G L I S H 30 CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER []] [[] (Select and Adjust) DISC/BAND 4 7 5 8 6 9 [MENU] A 0 [ENTER] VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE AUTO 1 2 3 : Automatically adjusted according to ambient light intensity. 4 : Darker (1) to Brighter (4) Press [ENTER] to set. Decrease the contrast between black and white. Increase the contrast between black and white. Darken Lighten Lighten the depth of color on the display Deepen the depth of color on the display Emphasize red in the color image Emphasize green in the color image CA-TU7000U 39 E N G L I S H 31 Sound Settings 1 Press [MENU] to display the main menu. 2 q Press [[] or []] to select "SOUND". w Press [ENTER] to set. [MENU] CY-VMC7000U [MODE] DISC/BAND CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [}] [{] []] [[] (Select) DISC/BAND VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE [ENTER] Bass / Treble Default : ± 0 dB Setting range : - 12 dB to + 12 dB by 2 dB step Select TONE Select SOUND Balance / Fader Default : Center Setting range :15 levels for each Select BAL/FAD 40 CA-TU7000U 3 Press [[], []], [}] or [{] to select and adjust. Notes: ¡Press [MODE] to return to the regular mode. ¡The display returns to the previous one if there is no operation for more than 60 seconds after changing to the setting / adjusting menu. [}] [{] []] [[] (Select and Adjust) [ENTER] [MODE] 1 2 3 E N G L I S H 32 CY-VMC7000U IN-DASH 7 WIDE COLOR LCD MONITOR / CD PLAYER [}] [{] []] [[] (Select and Adjust) DISC/BAND 4 7 5 8 6 9 [MENU] A 0 VOLUME MUTE MENU MODE POWER NAVIGATION ASPECT NAVI ASP P·MODE ENTER TRACK/ YUNE BASS Bass Adjustment Decrease the bass level. Increase the bass level TREBLE Bass Adjustment Decrease the treble level Increase the treble level FADER Fader Rear enhanced Front enhanced BALANCE Balance Left enhanced Right enhanced CA-TU7000U 41 E N G L I S H 33 Installation Guide WARNING This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product. Any attempt to install this product in a motor car by anyone other than qualified installer could cause damage to the electrical system and could result in serious personal injury or death. Overview This product should be installed by a professional. However, if you plan to install this product yourself, your first step is to decide where to install it. The instructions in these pages will guide you through the remaining steps: (Please refer to the "WARNING" statement above). ¡Identify and label the car wires. ¡Connect the car wires to the wires of the power connector. If you encounter problems, please consult your nearest professional installer. Installation Hardware No. q Item Binding-Head Screw (M3 x 6 mm) Diagram Qty 2 4 4 4 2 2 2 2 1 1 1 Binding-Head Screw w (M5 x 8 mm) Tapping Screw e (M6 x 20 mm) r Hex. Nut (M5) t Mounting Bracket y Base Bracket Double-Faced Adhesive u Tape Caution: This unit operates with a 12 volt DC negative ground auto battery system only. Do not attempt to use it in any other system. Doing so could cause serious damage. i Velcro Tape o Power Connector !0 Ground Lead Before you begin installation, look for the items on the right which are packed with your unit. ¡Panasonic Servicenter for Service Directory . . . . . . Keep for future reference in case the product needs servicing. [. . . ] Never use benzine, thinner or other solvents. E N G L I S H 48 Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician. Replacing the Fuse Use fuses of the same specified rating (15 amps). Using different substitutes or fuses with a higher rating, or connecting the product directly without a fuse, could cause fire or damage to the stereo unit. If the replacement fuse fails, contact your nearest Panasonic Servicenter for service. Reset Switch Reset switch Insert a hard, slender stick into the hole and push the switch. [. . . ]