User manual PANASONIC CA-TU9000U

[. . . ] E N G L I S H 61 Installation Guide Before Installation Required Tools You'll need a screwdriver, 1. 5 V AA battery, and the following: 12 V DC test bulb Electrical tape Slide-cut pliers E N G L I S H 62 WARNING This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product. Any attempt to install this product in a motor car by anyone other than qualified installer could cause damage to the electrical system and could result in serious personal injury or death. Overview This product should be installed by a professional. However, if you plan to install this unit yourself, your first step is to decide where to install it. [. . . ] Ground lead To a clean, bare metallic part of the car chassis. AMP-CONT MAX 0. 1A Front Ground terminal Power connector Center speaker output connector Radio antenna connector Front (Blue/white stripe) (Fuse 15 A) BATTERY 15A (Yellow) Optical digital input connector Connects the optical fiber cable (sold separately) to CY-VMD9000U display unit or DVD player. ( pages 84­87) Insert the dust cap when the terminal is not in use. Dust cap Sub·W Center Rear Note: · Use the radio antenna extension cord ; if necessary. CD changer control connector ( page 88) (Resistor 220 ) ACC (Red) (Black) Pre-out connector (front) Pre-out connector (rear) Pre-out connector (center) Subwoofer output connector To external amplifier 82 CA-TU9000U CA-TU9000U 83 E N G L I S H 69 Electrical Connections (Continued) Connection with the Display Unit (CY-VMD9000U) Notes: Refer to the operating instructions for the connected devices, in addition. Refer to the operating instructions for the CY-VMD9000U. E N G L I S H 70 CY-VMD9000U Display unit (rear) Power connector (supplied to CY-VMD9000U) R (Red) Pre-out cord PRE-OUT No audio is output from the pre-out cord when connecting to CA-TU9000U. L (White) Optical fiber cable (sold separately, CA-LRD60) Notes on handling optical fiber cable: · Do not bend the cable sharply. · Do not allow the cable to be damaged by getting it caught in the door, placing a heavy object on it, etc. (Red) (Red) This unit (front) CY-VMD9000U Control unit This unit (rear) CY-VMD9000U Control unit To subwoofer + RCA cord (optional) (Black) Power amplifier (Black) = Center speaker extension cord CENTER CENTER To center speaker + (Black/green stripe) (Green) (Black/green stripe) (Left) - Rear speaker cord (left) REAR L < Center speaker cord (Green/black stripe) (Violet) To rear speaker + Rear speaker cord (right) REAR R (Right) + (Violet/black stripe) (White) 9 Power connector FRONT L Front speaker cord (left) Display unit/control unit connecting cord (supplied to CY-VMD9000U) (Left) - (White/black stripe) (Gray) To front speaker + Front speaker cord (right) FRONT R (Right) - (Gray/black stripe) 84 CA-TU9000U CA-TU9000U 85 E N G L I S H 71 Electrical Connections (Continued) Connection with the Display Unit (CY-VMC7000U) and DVD Player (CX-DV700U) Notes: Refer to the operating instructions for the connected devices, in addition. Refer to the operating instructions for the CY-VMC7000U/CX-DV700U. Notes on handling optical fiber cable: · Do not bend the cable sharply. · Do not allow the cable to be damaged by getting it caught in the door, placing a heavy object on it, etc. Optical fiber cable (sold separately, CA-LRD60) Power connector (supplied to CX-DV700U) Power connector (supplied to CY-VMC7000U) R (Red) E N G L I S H 72 CY-VMC7000U Display unit (rear) DVD Player CX-DV700U Pre-out cord PRE-OUT No audio is output from the pre-out cord when connecting to CA-TU9000U. L (White) RCA cord (optional) Video (Yellow) R (Red) L (White) Remote-out cord REMOTE-OUT RCA cord (optional) R (Red) L (White) Video (Yellow) This unit (front) + This unit (rear) To center speaker - (Black) (Black/green stripe) (Red) = Center speaker extension cord CENTER CY-VMC7000U Control unit (Red) To subwoofer + RCA cord (optional) Power amplifier (Green) CY-VMC7000U Control unit (Left) - Rear speaker cord (left) REAR L (Green/black stripe) (Violet) (Black) To rear speaker + < Center speaker cord CENTER Rear speaker cord (right) REAR R (Right) + (Violet/black stripe) (White) (Black/green stripe) 9 Power connector FRONT L Front speaker cord (left) Display unit/control unit connecting cord (supplied to CY-VMC7000U) (Left) - (White/black stripe) (Gray) To front speaker + Front speaker cord (right) FRONT R (Right) - (Gray/black stripe) 86 CA-TU9000U CA-TU9000U 87 E N G L I S H 73 Electrical Connections (Continued) Connection with CD Changer (CX-DP88U) Note: Refer to the operating instructions for the connected devices, in addition. Ground lead (Black) CD Changer (CX-DP88U) Troubleshooting Preliminary Steps Check and take steps as described in the tables below. If You Suspect Something Wrong Immediately switch power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs. Never try to repair the unit yourself because it is dangerous to do so. Cautions: Do not use the unit if it malfunctions or is something wrong. Do not use the unit in abnormal condition, for example, without sound, or with smoke or foul smell, can cause ignition or electric shock. Immediately stop using it and call the store where you purchased it. E N G L I S H 74 Power connector (supplied to CX-DP88U) RCA cord (R) (Red) Note: Refer to the operating instructions of the display unit (CY-VMD9000U/VMC7000U) with regard to remedy. CY-VMD9000U/VMC7000U Control unit (front) (L) (White) Battery lead (Yellow) BATTERY Troubleshooting Tips Common Trouble Cause/Step Car's engine switch is not on. Turn your car's ignition switch to ACC or ON. Connect cables correctly. (Fuse 3 A) DIN cord This unit (front) CD changer control connector CY-VMD9000U/VMC7000U Control unit (rear) Battery cable is not correctly connected. Connect the battery cable to the terminal that is always live. Accessory cable is not correctly connected. Connect the accessory cable to your car's ACC source. Grounding wire is not correctly connected. Connect the grounding wire to a metal part of the car. 9 Power connector This unit (rear) Fuse is burnt. [. . . ] 5, 451, 942 and other world-wide patents issues and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. Title, Chapter (DVD) DVDs are divided into some large sections (titles) or some small sections (chapters). Each section is numbered; these numbers are called "Title number" or "Chapter number". [. . . ]