Detailed instructions for use are in the User's Guide.
[. . . ] Fujitsu and the Fujitsu logo are registered trademarks, and LifeBook is a trademark of Fujitsu Limited. Built for Humans is a trademark of Fujitsu PC Corporation. The following are registered trademarks of IBM Corporation: IBM, IBM PC AT, IBM PS/2. The following are registered trademarks of Microsoft Corporation: MS, MS-DOS, Windows, Windows 98, Windows NT.
PCMCIA is a trademark of the Personal Computer Memory Card International Association. [. . . ] Default [Disabled] Description When set to Enabled, a password (User or Supervisor) is required after the Power On Self Test (POST) before the operating system will be read from a disk. When set to Disabled no password is required. If no Supervisor Password is set this feature is not available and no password is required. When set to Enabled, a password (User or Supervisor) is required to resume from Suspend or Save-to-Disk mode. The password required is the same one required by the Password on Boot function. Sets write protection for the sector of the boot disk which contains the operating system. When set to Write Protect, the BIOS will prevent any application from writing into the sector of the internal hard drive containing the operating system. When set to Normal there is no BIOS protection of the operating system. -- When set to Enabled , a password (User or Supervisor) is required to access data on the disk drive on the Primary Master interface.
Power Management Security: Fixed disk boot sector:
Enabled; Disabled.
[Disabled]
Normal; Write Protect.
[Normal]
Fixed disk security: Primary Master:
-- Enabled; Disabled.
-- [Disabled]
81
Four
Section
Four
CAUTION If you set a password, write it down and keep it in a safe place. If you forget the password you will have to contact your support representative to regain access to your secured functions and data.
POINT If you make an error when re-entering the password a [Warning] will be displayed on the screen. To try again press the Enter key and then retype the password. If you choose to customize the parameters you will be able to set this yourself. The options available vary from Off, which has no inactivity shutoff, to 20 minutes. Sets the length of time without any user input device activity before the display is turned off. If you choose a factory combination of parameters, this field will display the setting. If you choose to customize the parameters, you will be able to set this yourself. Turns on and off the slow down of the CPU during periods of inactivity. When this is turned on the CPU clock slows by the amount set in the Advanced Features submenu when there is no activity for 16 seconds or more. Normal speed resumes automatically as soon as there is any activity.
Video Timeout:
2 minutes to 20 minutes; Off.
[Off]
Idle Mode:
On; Off.
[On]
85
Four
Section
Four
Table 4-13 Fields, Options and Defaults for the Power Menu. Menu Field Standby Timeout: Options 1 minute to 16 minutes; Off. Default [4 Minutes] Description Sets the length of time without any user input device activity before the CPU is set to half speed and the display and the hard drive are turned off. If you choose a factory combination of parameters this field will display the setting. [. . . ] 3, 5, 39-40, 59, 73, 88, 104, 106, 109, 114, 118, 133, 143-144 Monitor . 3, 8, 28, 45, 109, 126, 128-129, 131, 142 Mouse . 3, 7, 23, 58-59, 66-67, 82, 90, 104, 108, 117, 143 Mouse cursor . 3, 12-13, 15-16, 44-46, 48, 50, 59, 62-64, 69, 81-82, 90, 92-94, 98, 116-117, 125, 129-132, 133-135, 149 Output only . [. . . ]
