User manual PANASONIC CF-VDD283

[. . . ] 16 Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Changing the Wireless Display Settings . . . 26 Magnetic Stripe Reader . . . . . . . . . . . . . . . 29 Fingerprint Scanner . . . . . . . . . . . . . . . . . . . . [. . . ] (The same function as . ) NOTE If you want to press short cut key, after pressing one key, press the second key in a continuous manner. For example, if you want to type Ctrl + C , after pressing Ctrl , press C . If a keyboard is connected to the computer, all operations on the keyboard are not reflected on the software keyboard. When using two or more keys in combination ( Ctrl + C etc. ), use the internal keyboard or the software keyboard alone. Ctrl + Alt + Del cannot be input through the software keyboard. Characters cannot be input through the software keyboard in the MS-DOS mode. For some applications, the software keyboard remains as an icon even when the character input box is selected. In this case, select [ Software Keyboard] on the taskbar. If you want to use the keyboard for a non-text-input application (e. g. , Windows explorer), first display the software keyboard and then select the application. Following these steps, you can use the keys of the software keyboard. Before shutting down and then restarting Windows, be sure to save all data. ( page 23) 19 Battery Power Replacing the Battery Pack When the charge provided by your battery pack is supplied for only a short period of time, even after fully charging according to the instructions, it may be time to replace your battery pack. The battery pack is a consumable item and therefore will require replacement (CF-VZSU21). CAUTION Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged. The battery pack is not charged when the wireless display is first purchased. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the wireless display, charging begins automatically. Use only the specified battery pack (CF-VZSU21) with your wireless display. Be sure the power has been turned off before proceeding. 1 Power off your wireless display. ( CAUTION page 12) Replace the battery pack with another one while the AC adaptor is connected, and do not disconnect the AC adaptor until the new battery has been fully charged. Image data saved on the wireless display may be lost. 2 Taking out the battery pack. 1 Slide the latch. 1 2 Open the cover. 3 Pull the tab on the battery pack and remove it from the wireless display. 2 3 Tab 20 Inserting a battery pack 1 Firmly attach the battery pack to the connector. 2 1 CAUTION Be sure to insert the battery pack as illustrated. [. . . ] If an image is displayed for a prolonged period of time, an afterimage may appear. Confirm the IP address, subnet mask, network type, and SSID settings on both the computer and the wireless display. Confirm the operation of the wireless LAN on the computer. The wireless LAN on the computer side is compatible with 802. 11b and 802. 11g, but if there is a possibility of interference from other devices on the network, set the computer's wireless LAN to 802. 11b only. [. . . ]