User manual PANASONIC CF-28P3JAZQM

[. . . ] 11 Operation Starting Up/Shutting Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD (Touchscreen) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Program Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Only the LCD backlight goes on when the screen is tapped. ) (Example for [External]. ) 3 Tap [OK]. 17 Keyboard Cancel Key F1 1 F2 2 F3 3 Alphabet Keys Mode Key Num (Shift) Key Q A * W / E + 4 5 R - 6 7 8 9 0 T = Y : U ' I " O @ P S $ D ( F ) G ? H ! K , J . L Backspace Key Enter Key Delete Key CAP (Shift) Key SPACE/SOFT Key Z X NUM C V B N M CAP DEL SOFT SPACE Mode Key The keyboard operation mode can be changed by a key press made in combination with the NUM key or CAP key (see NUM key or CAP key). A symbol or numeral on the key-top is input by pressing the Mode key (the numeric key lock indicator goes on) followed by the corresponding alphabet key. Each Mode key press works for the input of only one symbol or numeral. This is convenient when using one hand to input sentences including symbols/numerals. Example: To input "abc. def. ", press the keys in the following order. A B C M D E F M ". " ". " NUM (Shift) Key Pressing this key alone is the same as pressing the Shift key of a computer. Each time the Mode key + NUM key are pressed, the mode changes from the alphabet input mode (default) to the symbol/numeral input mode, and vice versa. In the symbol/ numeral input mode (numeric key lock indicator on), the symbols and numerals on the key-top can be inputted continuously. To exit the symbol/numeral input mode, you can also choose to press only the NUM key. Cancel Key Pressing this key stops the running of a program (the same as pressing ESC on a computer). Backspace Key This key works the same as the Backspace key of a computer. Be sure to charge it before using it for the first time. When the AC adaptor is connected to the computer, charging begins automatically. Use only the specified battery pack (CF-VZSU22) with your computer. 21 SD/Multi Media Card An SD/Multi Media card can be used for the following purposes. The exchange of data with various devices equipped with an SD/Multi Media card slot, audio storage, and so on. NOTE Software (e. g. , drivers) required to exchange data with these devices. (Refer to the instructions manual provided with each SD compatible peripheral device. ) Use as a memory card (e. g. , use as a storage unit on which files can be written). Installing/Removing an SD/Multi Media Card 1 2 Open the SD/Multi Media card slot cover. Installing Slide the card in until it snaps into place as shown in the illustration. Make sure the labeled face of the SD/Multi Media card is towards the front of the computer and then firmly insert the card. If you mistaken the back side of the card with the top surface side, the card cannot be inserted all the way into the slot. SD/Multi Media Card Slot Insert the card all the way into the slot. (2) Remove the card. 3 Close the SD/Multi Media card slot cover. CAUTION Before removing an SD/Multi Media card or powering off the computer, check to see if the computer is trying to access the card. Such accesses are done intermittently for a short period of time. [. . . ] Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage ­ This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. [. . . ]