User manual PANASONIC CF-28PBJAZEM

[. . . ] 8 Computing on the Road . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 CD-ROM Drive* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For example: Try disabling serial devices when using a modem card. Windows 98 For the following cases, be sure the power has been turned off before proceeding. · When removing a network card · When replacing a CardBus type card with another card (including another CardBus type card) Installing/Removing the PC Card Installing a PC Card Open the cover, then slide the PC Card in until it snaps into place. Refer to the manual for each card on how to install the card (insertion is typically label-side up). After inserting the card, close the cover. CAUTION Label-side up In the case of a PC Card to connect a peripheral device (SCSI, IEEE 1394, etc. ), first connect the peripheral device to the card, and turn on the device, then insert the card. When inserting a card, do not force the card in if difficulty is encountered. You may damage the slot, making it impossible to remove the card. When inserting a PC card for the first time, the card will only work after being recognized by the computer. Insert the card after powering off the computer and wireless display, and then connecting the port replicator, optional USB floppy disk drive, external keyboard and external display. Once the driver of the card is installed, you can insert the card anytime. (To next page) PC Cards Removing a PC Card CAUTION Do not remove a PC Card while your computer is in the standby or hibernation mode. 3 Remove a check mark [Disable in this hardware profile], select [OK], then select [Close]. 4 Restart the computer. NOTE Do not use standby or hibernation functions during communications. Unable to connect to network (When the indicator of your HUB unit does not light): Windows 98 1 Select [Network] in [Start] - [Settings] - [Control Panel]. 2 Select [Intel(R) PRO/100 VE Desktop Adapter]. 5 Select [Link Speed & Duplex] from [Property], set [Value] to the communication speed (10 Mbps or 100 Mbps) suitable for your network environment, then select [OK]. Windows 2000 1 Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] [Hardware]. 2 Select [Intel(R) PRO/100 VE Desktop Adapter] from [Network adapters]. 5 Select [Link Speed & Duplex] from [Property], set [Value] to the communication speed (10 Mbps or 100 Mbps) suitable for your HUB unit, then select [OK]. Using the computer as a network computer When using the computer as a network computer, some additional settings may have to be made depending on the usage conditions. We recommend asking your system administrator or the person in charge of the network. LAN <Only when the port replicator is connected> Wake up from LAN This is a function to automatically power the computer on from a network server when the computer is in the standby or hibernation mode*. To use this function, it is necessary to have a network environment that accommodates Wake up from LAN. To use this function: 1 Select [Device Manager]*1 in [Start] - [Settings] - [Control Panel] - [System]. 2 Select [Intel(R) PRO/100 VE Desktop Adapter] from [Network adapters]. [. . . ] Click in the top of right corner of the window. 43 1 2 3 4 5 6 7 Disk Operations Cannot read/write to a disk Unable to write to a disk How to format a disk is unclear Unable to read/write to the hard disk When the previous item is not the cause Trouble has occurred with the disc The access lamp does not light Cannot play disc or read data from it Cannot eject disc Has the disk been correctly inserted?Select [Format] in [My Computer] - [3 1/2 Floppy (A:)] - [File]. After confirming the disk volume and format type, start formatting. Your drive or file may not have been properly set. [. . . ]