User manual PANASONIC CF-35EJC4BAM

[. . . ] 20 Reference Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Reference Manual · Touch Pad · Standby/Hibernation Functions · Security Measures · Computing on the Road · Battery Power · SD-MovieStage · DVD-ROM & CD-R/RW Drive · PC Cards · SD Memory Card/ MultiMedia Card · RAM Module · External Display · USB Devices · Modem · LAN · Wireless LAN · Setup Utility Troubleshooting List of Error Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Dealing with Problems (Summary) . . . . . . . . . . . . . . . . . . . . . . . 23 Reinstalling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This will restore the Setup Utility's settings to their default values (except the password settings). Then, the Setup Utility must be run once again for you to input the appropriate operating environment settings. (The processing speed depends on the application software used, so this operation may not cause the processing speed to increase. ) If operations slow down during streaming playback, try changing the number of colors of the display. You can set the date and time using the following menu: Windows XP [start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time] Windows 2000 [Start] - [Settings] - [Control Panel] - [Date/Time] If you continue to experience problems, the internal battery maintaining the clock may need to be replaced. Contact your technical support office ( page 45). When the computer is connected to a LAN, confirm the date and time of the server. This computer will not correctly recognize the date and time starting from the year 2100 A. D. Even when a password has been set in the Setup Utility, [Enter Password] does not appear when the computer resumes from the standby or hibernation mode. If you want to use the security function when using the standby or hibernation mode, use the Windows password as follows: Windows XP Select the account to change in [start] - [Control Panel] - [User Accounts] and set the password, then add the check mark for [Prompt for password when computer resumes from standby] in [Control Panel] - [Performance and Maintenance] - [Power Options] [Advanced]. Windows 2000 Set the password in [Start] - [Settings] - [Control Panel] - [Users and Passwords], then add the check mark for [Prompt for password when computer goes off standby] in [Control Panel] - [Power Options] - [Advanced]. This means a floppy disk that does not contain system startup information has been left in the floppy disk drive. If you want to switch the display destination repeatedly by pressing Fn + F3 , make sure that the display destination has switched completely each time before pressing Fn + F3 again. Has the computer been set to the power-saving mode?To resume operation of your computer from the condition the power of the display is off (for energy conservation purposes), press any key unrelated to the direct triggering of a selection, like Ctrl . To save power, your computer may have automatically entered the standby mode (power indicator blinks green) or hibernation mode (power indicator turns off). Press Fn + F2 and adjust the brightness. Note, however, that when the brightness is increased, the battery running time will become shorter. Brightness can be set to separate levels for when the AC adaptor is connected and when it is disconnected. If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard (Press , U , and select [Restart] with , then press Enter ). If the computer does not respond to keyboard commands, read "No response" ( page 26). Troubleshooting The power has not been turned off, but after a certain period of time, there is no display When the battery pack is used, the screen is darker than when the AC adaptor is connected The cursor cannot be controlled properly 24 Display (continued) An afterimage appears (e. g. , green, red, and blue dots remain on the display) or there are dots not displaying the correct colors The screen becomes disordered The external display no longer displays properly During simultaneous display, the screen of the external display becomes disordered If an image is displayed for a prolonged period of time, an afterimage may appear. The afterimage will disappear when a different screen is displayed. [. . . ] ("PCI") warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified. Scope of Coverage Whole Product (except Batteries), AC adaptor and CD-ROM (if factory installed) Batteries, CD-ROM (unless factory installed), Port Replicator, Extra Memory Modules and all other Peripherals, Options and Accessories Period of Coverage Three (3) Years from Date of Original End User Customer Purchase One (1) Year from Date of Original End User Customer Purchase Type of Failure Coverage Defective Materials or Workmanship Defective Materials or Workmanship Remedy ­ In the event of a warranty claim, contact PCI's representatives within the applicable warranty period, identifying the nature of the defect claimed, at 1-800-668-8386 between 9:00 A. M. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. [. . . ]