User manual PANASONIC CF-48M3XXXXX

[. . . ] ® Personal Computer Reference Manual Model No. CF-48 Series Contents 98 NT 2000 Read Me First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Key Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It is possible to change the setting to display only on the external display or only on the internal LCD with the Fn + F3 keys. However, in the following cases, the setting cannot be changed with the Fn + F3 keys. - When either the internal LCD or external display is set to [Secondary] in [Displays] of Display Properties. - Windows 98 When the computer is in the Dual-Display mode. ( page 33) Windows 98 Windows 2000 4 Select your external display Set your external display for [Monitor] in [Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced]. When a monitor that does not conform to the Plug & Play standards is connected, select [Change]* and make the monitor settings. * Windows 2000 : [Monitor] - [ Properties] - [Driver] - [Update Driver]. NOTE For more detailed information, refer to the operation manual of the external display. External Display Using Dual-Display Mode Windows 98 33 When an external display is connected, it is possible to use both the LCD of the computer (i. e. , internal LCD) and the external display as an extended display domain with the Dual-Display Mode. It is possible to drag a window from the internal LCD to the external display. Setting Dual-Display Mode 1 In [Start] - [Settings] - [Control Panel] - [Display], select [Settings] 2 Click the monitor icon of the external display [2] 3 Set the Screen area and Colors The display asks you to enable this monitor, press [Yes], then press [Apply]. This step is to set the screen area and colors for the internal LCD and external display. The internal LCD and external display are each assigned a monitor number ([1] or [2]). For the internal LCD [1] and external display [2], click on each of them to set the screen area and colors. To confirm the monitor numbers: By clicking and holding down on the monitor icon in the Display Properties dialog box, the monitor number corresponding to the icon will be displayed. NOTE Set the colors to 16 bits or less when setting the resolution of the external display to 1280 x 1024 or more. The screen area will not be properly displayed when the colors are set to 24 bits or more. 4 Set the Position of the Extension Display (External Display [2]) Drag and drop the monitor icon of the external display [2]. Operations will be facilitated when the monitor number matches the actual arrangement position of the external display. 5 Select [OK] NOTE There are some applications that cannot be used in the Dual-Display Mode. When the button to maximize a window is pressed, one of the displays will show the maximized display. A window that has been maximized cannot be moved to the other display. Fn + F3 does not work when the computer is in the Dual-Display Mode. When the Dual-Display mode is being utilized, the pop-up icon window is displayed only on the display set to [Primary]. The setting of the primary side can be changed in [Display] - [Settings] - [Advanced] [Displays]. To end the Dual-Display mode, turn off the power and remove the external display. (To next page) External Display CAUTION When the application running is not shown on the display, refer to the following items. (Under the condition the application is in the external display (external display [2]), or after the application is closed in the external display, there are cases the application will not be shown in the display when executed the next time if the Position of the Extension Display is changed or the Dual-Display Mode is closed. ) When there is no display after the Position of the Extension Display is changed: The application running is being displayed at the Position of the Extension Display before the change. Return the Position of the Extension Display to the condition before the change once, move the application to the internal LCD (internal LCD [1]), and then correct the Position of the Extension Display. [. . . ] Set the [CD Drive Speed] to [Low] in the Setup Utility. ( page 47) Dealing With Problems (Advanced) Network Unable to connect to a network When using the computer as a network computer, some additional settings may have to be made depending on the usage conditions. We recommend asking your system administrator or the person in charge of the network. The computer may be restarted if standby or hibernation mode is entered. [. . . ]