User manual PANASONIC CF-50J2KUEKM

[. . . ] Personal Computer OPERATING INSTRUCTIONS Model No. CF-50 series XP Contents Getting Started Getting Started Appendix Troubleshooting Operation Read Me First . 9 Operation Starting Up/Shutting Down . 13 16 17 18 Troubleshooting List of Error Codes . 27 Appendix LIMITED USE LICENSE AGREEMENT. [. . . ] Use only peripheral devices that conform to the computer's specifications. Connect the devices properly, paying close attention to the condition and position of the connectors. If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc. ) . If the connector has holding screws, fasten the screws firmly. Do not carry the computer with cables attached, and do not pull on the cables forcefully. 19 Operation Useful Information Saving Data on the Hard Disk Do not expose your computer to shock. Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable. Do not power down your computer while software applications are running or hard disk drive indicator is on. Properly shut Windows down to avoid problems. Backing up data to disks will limit damage should trouble occur to your computer or should you inadvertently change or erase data. Use the security function for all important data. ( Reference Manual "Security Measures") Hard Disk Lock When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read/write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee the complete protection of data. ) ( Reference Manual "Security Measures") Operation Saving Data on Floppy Disks Do not power down your computer or press the floppy disk drive eject button while the floppy disk drive indicator is on. Doing so may damage the data on the floppy disk and render the floppy disk useless. To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck in your computer, avoid the following: · Sliding the shutter on the floppy disk manually. · Exposing the floppy disk to a magnetic field. · Storing the floppy disk in locations prone to high temperatures, low pitched noise, dampness, or dust. · Applying more than one label on the floppy disk. Confirm the contents of a floppy disk before formatting it. Confirm that no important data is on the floppy disk, because all data on the floppy disk will be erased. This is a must for preserving important data. [. . . ] ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If a problem with your product develops during or after the warranty period, you may contact our representatives at 1-800-LAPTOP5. [. . . ]