User manual PANASONIC CF-51GAMDAKM

[. . . ] Personal Computer OPERATING INSTRUCTIONS Model No. CF-51 series XP Contents Getting Started Getting Started Appendix Troubleshooting Operation Read Me First . 11 Operation Starting Up/Shutting Down . 15 18 19 20 Troubleshooting List of Error Codes . 29 Appendix LIMITED USE LICENSE AGREEMENT. [. . . ] If a connection cannot be made easily, do not apply undue force; check once more to confirm the condition and position of the connector (alignment of pins, etc. ) . If the connector has holding screws, fasten the screws firmly. Do not carry the computer with cables attached, and do not pull on the cables forcefully. 21 Operation Useful Information Saving Data on the Hard Disk Do not expose your computer to shock. Use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable. Do not power down your computer while software applications are running or hard disk drive indicator is on. Properly shut Windows down to avoid problems. Backing up data to disks will limit damage should trouble occur to your computer or should you inadvertently change or erase data. Use the security function for all important data. ( Reference Manual "Security Measures") Hard Disk Lock When the Hard Disk Lock is set to [Enable], it is impossible to read/write data from/to the hard disk when the hard disk is installed in a different computer, since a password is also set for the hard disk. When the hard disk is returned to the original computer, you can read/write data as before. In this case, however, make the settings in the Setup Utility exactly the same as they were before the hard disk was removed. (Note that this Hard Disk Lock does not guarantee the complete protection of data. ) ( Reference Manual "Security Measures") Saving Data on Floppy Disks Operation Do not power down your computer or press the floppy disk drive eject button while the MP indicator is on. Doing so may damage the data on the floppy disk and render the floppy disk useless. To protect the data on your floppy disks or to prevent a floppy disk from becoming stuck in your computer, avoid the following: · Sliding the shutter on the floppy disk manually. · Exposing the floppy disk to a magnetic field. · Storing the floppy disk in locations prone to high temperatures, low pitched noise, dampness, or dust. · Applying more than one label on the floppy disk. Confirm the contents of a floppy disk before formatting it. Confirm that no important data is on the floppy disk, because all data on the floppy disk will be erased. This is a must for preserving important data. This prevents your data from being erased or overwritten. When Disposing of or Transferring Ownership of This Device When disposing of or transferring ownership of this device, erase all data on the hard disk in order to prevent the theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can still be read using special software. [. . . ] Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage - This Limited Warranty does not cover products purchased outside Canada. Neither does it cover damage to, failure of, or defects in a product or accessory through mishandling, improper installation, abnormal use, misuse, neglect, accident, introduction of liquid or other foreign matter into the product, alteration or servicing by anyone not authorized by PCI, or act of God. I IF YOU SHIP THE PRODUCT FOR WARRANTY SERVICE Carefully pack the product, preferably in the original carton. Include details of defect claimed and proof of date of original purchase. [. . . ]