User manual PANASONIC CF-VDW07CRFM

[. . . ] OPERATING INSTRUCTIONS Wireless Display with Magnetic Stripe Reader and Fingerprint Scanner Model No. CF-VDW07CRFM Contents Read Me First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 First-time Operation . . . . . . . . . . . . . . . . . . . . . . 11 Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Software Keyboard . . . . . . . . . . . . . . . . . . . . . . [. . . ] Before shutting down and then restarting Windows, be sure to save all data. If an attempt is made to shut down the computer while data is being edited, a message will appear asking whether to save the current data or not. In such cases, return to Windows, save all data, and then shut down the computer. 16 Changing the Settings You can change the keyboard size, switch the keyboard to the numeric keypad, or change other settings using the system menu. 1 Select (on the top left corner of the software keyboard). 2 Add a check mark to the function you want to use. The software keyboard moves automatically so as not to hide the window currently selected. (It will not move if there is no place that it can move to. ) Also, the software keyboard will move to the topmost position on the display when the computer changes to input mode. If the software keyboard has been minimized on the taskbar, it will automatically be restored and will move to the topmost position on the display when the computer changes to input mode. Depending on the application, this function may not work. Set the software keyboard to the topmost position on the display. Set the software keyboard to transparent display. Select the keyboard/keypad. NOTE The currency symbols displayed on the numeric keypad are set using the following menu. [start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Regional and Language Options] - [Regional Options] - [Customize] - [Currency] - [Currency symbol] 17 Battery Power Battery Status Use the Battery Indicator to Check on the Battery Status Battery Indicator Orange*1 Green*1 Red Blinking red*1 Battery Status Charging Fully-charged Battery charge is low (the charge is less than approx. 9% capacity) Battery pack or charger may not be working properly. Quickly remove the battery pack and disconnect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. Unable to recharge due to violation of temperature limits. (The ambient temperature is outside the allowable range. Once the allowable range requirement is satisfied, charging begins automatically. ) Battery is discharging to prescribed charging level in high temperature mode. Battery pack is not connected or charging not being performed. Blinking orange*1 Blinking green Not lit *1 When the AC adaptor is connected. NOTE This wireless display prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity after the battery is fully charged. 18 Getting a detailed reading 1 Press Menu button. ( page 23) Menu Button NOTE The actual remaining battery capacity and the displayed indication may differ. · The battery indicator light remains red. · The battery remaining displays 99% and the indicator light is orange for a long period of time. [. . . ] If your computer and the wireless display do not power off normally due to a reason such as a network error, it may take two or three minutes to reconnect. Put the wireless display close to the computer. Confirm the IP address of the computer that has been set on the wireless display. Confirm the password for both the computer and the wireless display. [. . . ]