User manual PANASONIC CF-VEB011

[. . . ] 26 Expanding Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Setup Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Usage/Handling/Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Wireless LAN<Only for models with wireless LAN>. . . 37 Windows/Antivirus Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the [Boot Menu] setting is changed, the selection screen display will also change. [Boot Menu] is displayed only when [Boot First Menu] in the [Security] menu is set to [Enable]. The computer cannot be booted from devices listed in [Excluded from boot order]. For this reason, the order of priority cannot be changed in this list. Bootable CD created using the B's Recorder in the CF-W2 and CF-Y2 series cannot be used on this computer. If you want to share bootable CD with those series, create a new bootable CD. This computer does not support startup operations from CD/DVD drives other than the internal DVD-ROM & CDR/RW drive. Getting Started Exit Menu Save Values & Exit Exit the Setup Utility and save your changes to CMOS. Exit Without Saving Changes Exit the Setup Utility without saving your changes to CMOS. Get Default Values Set the Setup Utility to the default settings. · This item is not displayed when starting up the Setup Utility with the User Password. Load Previous Values Load previous values from CMOS for all Setup items. If you intend to use the computer in the environments described above, turn off the wireless LAN power. (below) Prevent theft of data or unauthorized access to the hard disk via a wireless LAN When using the wireless LAN function, there is a danger that data may be stolen from the hard disk, or that shared files may be accessed. If you plan to use wireless LAN functions, we recommend that you do so only after making the appropriate security settings, such as for encryption. Turning on/off the Wireless LAN Power Before using a wireless LAN, turn it on using the wireless LAN switch. After turning the wireless LAN power on or off, it may take some time before the [Available Networks] screen is renewed. 1 Slide the wireless LAN switch (A) to turn the wireless LAN power on or off. To turn the power on, slide the switch to the right. The wireless LAN icon will show. The wireless LAN icon will show. Enable/Disable Wireless LAN Standard IEEE802. 11a In some countries, communication using IEEE802. 11a (5 GHz wireless LAN) standard is restricted by law. Comply with the laws in the country concerned. ( page 3) 1 2 Click the icon (when the wireless LAN is on) or the icon (when the wireless LAN is off) on the notification area. To disable IEEE802. 11a: Click [802. 11a Disabled]. To enable IEEE802. 11a: Click [802. 11a Enabled]. Even when IEEE802. 11a is enabled or disabled, change. or will not 37 Useful Information To turn the power off, slide the switch to the left. Operation Windows/Antivirus Protection Windows Depending on the settings in Windows, installed applications, drivers, menus and other displays may be inoperable. In some cases, certain functions, such as the password reset disk ( page 21), may not operate. [. . . ] (At the time of purchase, the power saving function is set to off. page 20) When Economy Mode (ECO) is enabled, the operating time becomes approximately 20% shorter than when it is disabled. Measured using BatteryMarkTM Version 4. 0. 1 (LCD brightness : Maximum - Minimum). Specifications *22 *23 Rated power consumption. *24 Operations of this computer are not guaranteed except for the pre-installed OS. [. . . ]