User manual PANASONIC CF-W2DWADZBM

[. . . ] OPERATING INSTRUCTIONS Personal Computer Model No. CF-W2 Series XP 2 For more information on how to use this computer, refer to the onscreen Reference Manual. page 8 For your technical support office, refer to the Operating Instructions. Starting Up/Shutting Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Using the Touch Pad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Using the Fn key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Making backup copies on SD memory cards, etc. and if necessary, carrying them with you. Maintenance Care of the display / touch pad: Wipe lightly with a gauze or other dry, soft cloth. When the touch pad or other area other than the screen becomes dirty: wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area gently. Using a detergent other than a neutral kitchen cleanser (e. g. , a weak alkali cleanser) may adversely affect painted surfaces. 32 CAUTION Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e. g. , discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. Do not directly add or spray water or detergent onto the computer. If liquid enters the inside of the computer, it may cause it to work improperly or be damaged. 33 Useful Information Operation Wireless LAN For instructions on settings for wireless LAN and cautions during use, click [start] [Reference Manual], and refer to "Chapter 5: Wireless LAN". About Turning on/off the Wireless LAN Before using a wireless LAN, turn it on using the following method (at the time of purchase, the wireless LAN is set to [On]). Turn on/off the wireless LAN using Intel(R) PROSet client. 1 Double-click the icon / the icon (when the wireless LAN is on) or the icon (when the wireless LAN is off) on the notification area. 2 3 4 Operation *1 Select your wireless LAN adaptor and click [General]. Click [OK]. · Do not click [Disable]*1 in [Network Connections]. This is displayed by right-clicking [Wireless Network Connection] in [Network Connections]. Do not use the wireless LAN in airplanes, hospitals, or in other locations where wireless LAN signals may affect the operation of devices in the vicinity. Abide by instructions regarding use in airplanes and hospitals. Useful Information This computer uses channels 1 through 11*2 Check the channel being used by the access point. *2 In the case of wireless communications, the frequency band being used can be divided into segments, so that different communications can be conducted on each band segment. A "Channel" refers to the individual frequency bandwidth divisions. 34 Windows Windows Depending on the settings in Windows installed applications, drivers, menus and other displays may be inoperable. In this case, refer to the items below, and the applied items from this manual, "Chapter 7: Dealing with Problems (Advanced)" in onscreen Reference Manual, Windows Help ( page 8), and the software application and driver's operating instructions, etc. Change the Way Users Log on or off If the check mark is added for [Use the Welcome screen] or [Use Fast User Switching] in [start] - [Control Panel] - [User Accounts] - [Change the way users log on or off], the operation differs as follows. Welcome screen settings The operations when starting and exiting Windows differ as follows. [Use the Welcome screen] setting When adding the check mark (when using) With no check mark (when not using) Operation when starting The list of user names will be displayed. Click the user name with which you want to log-on. Enter the user name and password, and click [OK]. Operation when exiting Click [start] - [Turn Off Computer] - [Turn Off]. Click [start] - [Shut Down] [Shut down] and click [OK]. Fast User Switching settings When adding the check mark for this setting, you can change to another user without logging on again when multiple users use the computer. In the following case, Fast User Switching cannot be used. When the check mark is not added for [Use the Welcome screen] When joining the network domain When the [Use when logging on to Windows] is set in [SD Card Setup] ( "Chapter 4: SD Memory Card Security Function" in the onscreen Reference Manual) Depending on the software application, the computer may not work properly if this function is used. This manual explains the procedure for cases where the check mark is added. When switching to a different user with the Fast User Switching function, it may not be possible to set the display settings. In this case, log-off all users, and retry the operation. 35 Useful Information · At the time of purchase, it is set with the check mark added (when using). [. . . ] Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This Limited Warranty will be governed by the laws the State of New York, without regard to its conflict-of-laws rules. * * * To obtain service or technical assistance within the continental U. S. A. and Alaska. In U. S. A For General Inquiry in English: DIAL TOLL FREE: (888) 270-5615 Monday-Friday (excluding US holidays) 9:00a. m. -5:30p. m. (CST) For Technical Support in English: DIAL TOLL FREE: (800) LAPTOP5 (527-8675) 365 days/24hours (888) 715-5155 (in Japanese) Monday-Friday (excluding US holidays, Dec. 24, Dec. 25, Dec. 30, Dec. 31, the day before Thanksgiving Day and the day following Thanksgiving Day) 10:00a. m. -7:00p. m. [. . . ]