User manual PANASONIC CF-W2DWAZZKM

[. . . ] Personal Computer OPERATING INSTRUCTIONS Model No. CF-W2 Series Getting Started Appendix Troubleshooting Operation Contents XP Getting Started Page Read Me First. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . 10 First-time Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Reference Manual · Read Me First · Key Combinations · LED Indicators Operation Starting Up/Shutting Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the disc cover is not closed, the LCD may become damaged. · Never insert foreign objects such as paper clips into the DVD-ROM & CD-R/RW drive. If the disc cover is closed without securely inserting the disc, the disc may be damaged. About recognition of media It may take about 30 - 40 seconds for an image recorded to a rewritable media to be played back. While the DVD-ROM & CD-R/RW drive is being accessed Do not open the DVD-ROM & CD-R/RW drive or move the computer while the DVDROM & CD-R/RW drive is being accessed. Doing so could cause the disc to shift position and this may damage the disc, or cause the DVD-ROM & CD-R/RW drive to malfunction. In addition, after running an application involving access to a disc, do not open the DVD-ROM & CD-R/RW drive until after the application has been closed. Do not shock the computer, such as by removing or inserting cords and cards. This may result in a read or write malfunction. Do not apply excessive force on the disc cover. Cleaning We recommend cleaning the drive lens with an air puffer used for camera lenses. (Do not use any spray-type of lens cleaning products. ) 27 Operation List of Error Codes When turning on the computer, if one of the following error codes or messages is displayed, follow the instructions shown below. If the problem persists, or if the error code or message displayed is not shown here, contact your technical support office ( page 45). Action If an external keyboard or mouse is connected, disconnect these devices. An error has occurred in the memory that stores the Setup Utility settings. This error occurs when the memory content is changed through some inadvertent operation by a program or other function. Run the Setup Utility and load the default values, then change the settings to the appropriate values as needed. If the problem persists, the internal clock battery may need to be replaced. 0271: Check date and time set- The date and time setting are incorrect. tings Run the Setup Utility and set the date and time correctly. If the problem persists, the internal clock battery may need to be replaced. 0280: Previous boot incomplete Startup has failed repeatedly, so the Setup Utility settings have been returned to their default - Default configuration used values, and the computer has been booted. Run the Setup Utility and load the default values, then change the settings to the appropriate values as needed. Press <F1> to resume, <F2> to Write down the error details and press F2 to run the Setup Utility. Confirm the Setup settings, and change the settings to the appropriate values as needed. [. . . ] A purchase receipt or other proof of date of original purchase is required before warranty service is performed. Defective parts covered by this Limited Warranty will be repaired or replaced with new or comparable rebuilt parts on an exchange basis. Warranty replacement or repair is subject to the terms of this Limited Warranty for the balance of the original period of warranty coverage. No Coverage ­ This Limited Warranty does not cover products purchased outside Canada. [. . . ]