User manual PANASONIC CQ-1000

[. . . ] It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly. Caution Observe the following cautions when using this unit. Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. Installation Angle The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details. Warning This pictograph intends to alert you to the presence of important operating instructions and installation instructions. [. . . ] ¡ Do not set the copy protect attribute on the WMA file to enable this unit to play back. Root Folder (Root Directory) q 4 3 Folder Selection e w In the order 1 * ­ 8 5 6 File Selection In the order ­ y q r 8 t y Tree 4 Tree 8 (Max. ) 7 Tree 1 Tree 2 Tree 3 Caution: Never assign the ". mp3", or ". wma" file name extension to a file that is not in the MP3/WMA format. This may not only produce noise from the speaker damage, but also damage your hearing. Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Copyright It is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval of copyright holder except enjoying yourself personally. No warranty Above description complies with our investigations as of December 2004. It has no warranty for reproducibility and displayability of MP3/WMA. 26 CQ-1000 CQ-1000 MP3/WMA Player 27 XM Tuner The optional XM receiver allows you to receive the XM radio service. 1 Press [SRC] (Source) to select the XM SRC CQ-1000 Note: "LOADING" is displayed when it takes for 2 sec. or more to receive the XM satellite radio. Selection by Category Satellite Radio mode. You can toggle the category on and off every time you hold down [BAND] for 2 sec. If the category is set to on, the unit operates as follows for each button: SRC CQ-1000 Channel selection (P·SET: Preset) []] (TUNE): Preceding channel in current category [[] (TUNE): Next channel in current category 2 Press [BAND] to select a band. Operation Flow 3 Select a channel. ¡ Connect the optional XM receiver (XMD1000). ¡ To connect the XM receiver (XMD1000), it is Category selection [{] (P·SET: Preset): Preceding category [}] (P·SET: Preset): Next category lights when activated. Channel selection []] : Preceding channel [[] : Next channel required to use an optional extension cord (XMDPAN100) that is produced by XM exclusively for Panasonic products. Notes: Preset channel selection ¡"RADIO ID" is displayed with channel 0. ¡"UPDATING" is displayed during the update of the identification code. TEXT Setting (XM Tuner Menu Display) [{] (P·SET: Preset): [}] (P·SET: Preset): Lower preset channel Higher preset channel 1 Press [MENU] to display the menu display. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. CQ-1000 TEXT : Enabled (Default) : Disabled ¡"LOADING" is displayed during the acquisition of audio data or information. Note: Direct selection can be executed with [1] to [6] buttons on remote control. Channel number/name XM Tuner Mode Display CQ-1000 Band indicates the satellite tuner is ready. Indicates the intensity of the radio wave. Artist name/Song title 3 Press [MENU] to confirm the adjustment. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. Functions Only by Remote Control Unit Channel Preset (P·SET: Preset) Up to 6 channels can be preset in XM1 to XM3 respectively. Preset channels can be simply called up by pressing [}] (P·SET) or [{] (P·SET). Note: To suspend direct selection, press [DISP] (Display). DISC RANDOM, DISC REPEAT Hold down the button for 2 sec. Hold down again to cancel. (Disc Random) (Disc Repeat) (Disc Scan) SCAN play (Only for CD-DA) You can find your favorite track by playing first 10-sec. of each track. SCAN (CD changer: All tracks, DVD changer: from selected disc) Press [SCAN]. Press again to cancel. 30 CQ-1000 CQ-1000 Disc Changer (When CDs or MP3 discs are loaded) 31 Disc Changer (when DVDs or VCDs are loaded) Connected an optional DVD changer (CX-DH801U) can be controlled by this unit. 1 Load a magazine (discs). When a magazine is already loaded, press [SRC] (Source) to select the DVD changer mode. The unit recognizes the magazine and starts playing automatically. Note: The power is turned on automatically when inserting a magazine. SRC CQ-1000 Notes: ¡ Please connect a CD changer or a DVD changer to AUX 2. ¡ "AUX 2" is display when connecting a changer that is not compatible with this unit. Operation Flow 2 Select a desired portion. Disc selection [}]: Next disc [{]: Preceding disc Random and Repeat play can be set. Random, Repeat Play (Disc Changer Menu Display) 1 ¡For a DVD insertion CHAPTER REPEAT : Off : Playing the current chapter repeatedly. Press [MENU] to display the menu display. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. CQ-1000 Chapter/Track selection [7]: Next chapter/Next track [6]: Preceding chapter/Preceding track (press twice) Note: Hold down for fast forward/reverse. TITLE REPEAT : Off : Playing the current title repeatedly. Note: The unit may not operate for some DVDs. 2 Press [}] or [{] to select a mode to be adjusted. (RANDOM, REPEAT) Pause Press [BAND] (y / 5). Press again to cancel. 3 Press [BAND] ¡For a VCD insertion CQ-1000 (SET) to adjust. REPEAT : Off : Playing the current track repeatedly Chapter number Disc number Changer indicator Time 4 Press [MENU] to confirm the adjustment. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. DISC REPEAT : Off : Playing the current disc repeatedly Notes: ¡ The unit may not operate for some VCDs. [. . . ] Failure to do so may result in damage to the unit. Connect the power lead (red) after all other connections are made. Be sure to connect the battery lead (yellow) to the positive terminal (+) of the battery or fuse block (BAT) terminal. Insulate all exposed wires to prevent short circuiting. [. . . ]