User manual PANASONIC CQ-2500

[. . . ] This could cause electrical shorts, fire, or other damage. When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before switching the unit on. Use the Proper Power Supply This equipment is designed to operate off a 12 volt, negative ground battery system (the normal system in a North American vehicle. ) Use Authorized Servicenters Do not attempt to disassemble or adjust this precision equipment. Please refer to the Servicenter list included with this product for service assistance. Protect the Compact Disc Mechanism Avoid inserting any foreign matters to the slot of the compact disc. Failure to observe this may cause malfunction due to precise mechanism of this unit. [. . . ] If you have a question concerning NOAA Weather Radio, please contact your nearest National Weather Service Office. 10 Compact Disc Player Basics Disc Insert Insert the disc and play starts automatically. "LOAD" will be displayed until the disc is loaded. Caution: Do not use irregularly-shaped (heart-shaped, octagon etc. ) CD. Failure to observe this may cause malfunction. Note: While the disc is in the deck, " " indicator lights. Disc Disc Ejection Press [u] to stop CD play, and the disc will be quietly ejected from the CD slot. (During disc ejection, "EJ" will be displayed. ) Disc Track Selection Press [j] once to go to the next track. j Press [i] once to play from the beginning of the track you are i listening to. Press repeatedly to skip the desired number of tracks. Disc Hold and release Track Search Press and hold [j] or [i] for more than 0. 5 seconds to activate j i fast forward or reverse. Release [j] or [i] to resume the regular CD play. j i Disc 11 Track Repeat Press [3 REP] to repeat the current selection. REPEAT Press [3 REP] again to cancel. Random Selection Press [6 RAND](RAND: RANDOM). A random selection of music is played from all available tracks. RANDOM Press [6 RAND](RAND: RANDOM) again to cancel. Track Scan Press [SCAN]. Item Mounting Collar Diagram Qty 1 Caution: This unit will operate with a 12 volt DC negative ground auto battery system only. Do not attempt to use it in any other system. Doing so could cause serious damage. Before you begin installation, look for the following items included in the packing with your unit. Needed for in-dash installation 18 Installation Procedures When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers. We strongly recommend you to wear gloves for installation work to protect yourself from injuries. Note: Disconnect the cable from the negative (­) battery terminal. 1. Secure the Mounting Collar Insert Mounting Collar screwdriver. . into the vehicle's dashboard, and bend mounting tabs out with a 2. Securre the rear of the unit. a) Insert Power Connector to the unit. b) Check the electrical connection by referring to this operating instructions. c) Insert the unit into Mounting Collar and push it in until "click" is heard. 19 To remove the unit from the vehicle's dashboard Insert Dismounting Pins and pull both pins. Dimounting Pin (U-shaped) Note: Do not lose Dismounting Pins. They will be needed to remove the unit from the vehicle's dashboard. 20 Electrical Connections (only for CQ-5400U) Cautions: This product is designed to operate with a 12-volt negative ground battery system. [. . . ] Move away from high power lines. Radio has static. Radio memory buttons do not Not holding buttons down long Press and hold buttons for more enough than 2 seconds. No sound can be heard even if The compact disc is inverted. Insert the disc with label side facing up. Try to clean the compact disc by instructions of disc cleaning. The temperature inside the Give the interior a chance to cool vehicle is more than 140°F (60°C) down before using the unit. [. . . ]