User manual PANASONIC CQ-C5110

[. . . ] Removable Full Front MP3 WMA CD Player/Receiver with CD Changer Control CQ-C5410/C5310U Removable Full Front CD Player/Receiver with CD Changer Control CQ-C5210/C5110U (CQ-C5410U) Operating Instructions Manuel d'instructions Manual de instrucciones Please read these instructions carefully before using this product and save this manual for future use. Prire de lire ces instructions attentivement avant d'utiliser Ie produit et garder ce manuel pour l'utilisation ultrieure. Lea con atencin estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. E N G L I S H Safety Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED COMPONENTS. Precautions When Driving Keep the volume level low enough to be aware of road and traffic conditions. Panasonic welcomes you to our ever growing family of electronic product owners. [. . . ] Select 36 CQ-C5410/5310/5210/5110U CQ-C5410/5310/5210/5110U 37 E N G L I S H 19 Audio Settings (continued) 1 Press [VOLUME] (SEL: select). 2 Turn [VOLUME]. (Press [VOL "] or [VOL #] on the remote control unit. ) E N G L I S H [SEL] (Select) POWER MENU 20 SOURCE SEL NUMBER [VOL "] VOL MUTE # 2 SCAN [VOL #] 3 REP 1 RAND 4 5 8 0 6 9 5 [VOLUME "] [VOLUME #] (Push. ) 7 6 BAND SET DISP [DISP] (Display) Car Audio Balance/Fader You can adjust the sound balance among the front, rear, right and left speakers. Default: BAL (balance) CNT (center) FAD (fader) CNT (center) Setting range: 15 levels each Select [VOLUME "]: Right enhanced [VOLUME #]: Left enhanced Select [VOLUME "]: Front enhanced [VOLUME #]: Rear enhanced Subwoofer Level You can change the subwoofer volume level. Default: 0 dB Setting range: MUTE (subwoofer mute), j6 dB to i6 dB (by 2 dB) Select [VOLUME "]: Increased [VOLUME #]: Decreased Note: Press [DISP] (display) to return to the regular mode. If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume setting, 10 seconds in SQ adjustment), the display returns to the regular mode. When SBC-SW setting (page 23) has been selected to ON, the settings resulting from the adjustments performed at the subwoofer level and subwoofer low pass filter settings are reflected in the output. Subwoofer Low Pass Filter (LPF) You can select the upper limit frequency of the sound from subwoofer. Default: 80 Hz Setting range: 80 Hz/120 Hz/160 Hz Select [VOLUME "]: Increased [VOLUME #]: Decreased High Pass Filter (HPF) Select the lower limit frequency of the sound from speakers (except subwoofer) Default: OFF Setting range: OFF/90 Hz/135 Hz/180 Hz/225 Hz Select [VOLUME "]: Increased [VOLUME #]: Decreased 38 CQ-C5410/5310/5210/5110U CQ-C5410/5310/5210/5110U 39 E N G L I S H 21 Function Settings 1 Press [MENU]. 2 Press [MENU]. (Press and hold [MENU] for more than 2 seconds on the remote control unit. ) The only items which can be set using [MENU] on this unit are the Function Settings (Spectrum Analyzer Display Pattern, Mute/Attenuation and Security Function). [SET] (Example: Radio mode) 3 Press [SET]. E N G L I S H [MENU] POWER MENU 22 VOL SOURCE SEL NUMBER MUTE # 2 SCAN 1 RAND 3 REP 4 7 6 5 8 0 6 9 5 BAND SET DISP [DISP] (Display) Car Audio Spectrum Analyzer Display Pattern Default: Pattern 1 Variety: 6 types _ OFF OFF Select Pattern 1 Note: No settings can be performed while "NO DISC" appears on the display. Press [DISP] (display) to return to the regular mode. Pattern 6 Mute/Attenuation You can select mute or attenuation when [MUTE] is pressed (page 23). Default: MUTE Select Decrease 10 steps (Attenuation) No sound (Mute) Security Function Allows you to activate the anti-theft function when leaving your car. Default: ON Select Security function is activated. Security function is not activated. Security Function When the key in the ignition is turned OFF Security message will be displayed. The panel removal alarm will be active. (page 49) When the front panel is removed The security indicator blinks. (page 49) 40 CQ-C5410/5310/5210/5110U CQ-C5410/5310/5210/5110U 41 E N G L I S H 23 Troubleshooting Preliminary Steps Check and take steps as described in the tables below. Caution: Do not use the unit if it malfunctions or if there is something wrong. Do not use the unit in abnormal condition, for example, without sound, or with smoke or foul smell, which can cause ignition or electric shock. Immediately stop using it and call the store where you purchased it. Problem Noise Possible cause There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines. Possible solution Keep an electromagnetic-wave generator such as a cellular phone away from the unit and the wiring of the unit. In case the noise cannot be eliminated due to the wiring harness of the car, consult your dealer. Make sure that the ground lead is connected to an unpainted part of the chassis securely. [. . . ] Bundle all cables and keep cable terminals free from touching any metal parts. Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased when the battery terminals are disconnected. Antenna PRE-OUT FRONT R (red) L (white) E N G L I S H 38 Preout cord (rear) PRE-OUT REAR R (red) L (white) Subwoofer cord CQ-C5410U CQ-C5210U CD changer control connector S. W-OUT (red) (white) Monaural CD changer input cord R (red) CD. C-IN L (white) Wiring Diagram Accessory used for wiring No. 6 Item Power connector Q'ty 1 CQ-C5310U CQ-C5110U Pre-amp output connector (front) (rear) L (white) R (red) (Blue/white stripe) CQ-C5410U AUX input cord R (red) AUX-IN S. W-OUT L (white) CD. C-IN AUX-IN CQ-C5310U Fuse (mini auto fuse type, 15 A) If the fuse (rear panel) blows frequently, they may be something wrong with the unit or wiring connection. Consult your nearest Panasonic Servicenter for service. [. . . ]