User manual PANASONIC CQ-CB9900

[. . . ] Removable Full Front MP3 WMA CD Player/Receiver with Full Dot Matrix Display and CD Changer Control CQ-CB9900U Operating Instructions Please read these instructions carefully before using this product and save this manual for future use. Safety Information WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED COMPONENTS. Precautions When Driving Keep the volume level low enough to be aware of road and traffic conditions. Panasonic welcomes you to our ever growing family of electronic product owners. We know that this product will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical engineering, manufactured with carefully selected components and assembled by people who take pride in their work. [. . . ] If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume setting, 10 seconds in SQ adjustment), the display returns to the regular mode. The volume can also be adjusted directly using [VOLUME] on the main unit (page 11). [SEL] (Select) POWER MENU SOURCE SEL NUMBER [VOL "] VOL MUTE # 2 SCAN [VOL #] 3 REP 1 RAND 4 5 8 0 6 9 5 1 Press [VOLUME] (PUSH SEL: select). Example: CD mode (Push) 2 Turn [VOLUME]. Press [VOL "] or [VOL #]. [VOLUME #] [%] [$] ["] [#] [BAND] 7 6 [2] to [6] (SQ preset buttons) [DISP] (Display) BAND SET DISP Car Audio [VOLUME "] Push Volume Default: 18 Setting range: 0 to 40 Push [VOLUME "]: Up [VOLUME #]: Down To return an adjusted SQ to the default setting 1 Press [SQ] during regular mode, and select the SQ which is to be returned to the default setting. 2 Press and hold [BAND] for more than 2 seconds. Bass/Treble You can adjust the bass and treble sound. Default: BAS (bass) 0 dB TRE (treble) 0 dB Setting range: j12 dB to i12 dB (by 2 dB) [VOLUME "]: Increased [VOLUME #]: Decreased [VOLUME "]: Increased [VOLUME #]: Decreased Push SQ Adjustment You can adjust the characteristics of the currently selected sound type (SQ). It is also possible for a maximum of 5 different adjusted SQ to be preset. Adjustable frequency: 60 Hz, 160 Hz, 400 Hz, 1 kHz, 3 kHz, 6 kHz, 16 kHz Setting range: j12 dB to i12 dB (by 2 dB) Setting of SQ, bass/treble and volume are influenced one another. If the influence mentioned above causes distortion to the audio signal, readjust bass/treble or volume. To return an adjusted SQ to the default setting (page 33) (page 34) Push Adjust 1 Press [%] or [$] to select a frequency. [$]: Increased [%]: Decreased 2 Turn [VOLUME] to adjust the equalizer level. [VOLUME "]: Up [VOLUME #]: Down Memorize 3 Press and hold ["] or [#] for more than 2 seconds to enter. 4 Press ["] or [#] to select a preset number (2 to 6). 5 Press and hold ["] or [#] for more than 2 seconds to memorize. The adjusted SQ is preset in the number of the selected button, and the regular display is restored. Press and hold one of the buttons from [2] to [6] for more than 2 seconds. Note: Only buttons [2] to [6] can be used to preset the adjusted SQ. An adjusted SQ cannot be preset in button [1]. While the SQ adjustment mode is established, only adjustments are performed, and even if the adjustment mode is exited without presetting an adjusted effect, what has been set will be reflected as the current SQ until another SQ is selected. Even when the SQ presets are adjusted, the display which appears when the settings are called remains unchanged. 32 CQ-CB9900U CQ-CB9900U 33 Audio Settings (continued) [SEL] (Select) POWER MENU SOURCE SEL NUMBER [VOL "] VOL MUTE # 2 SCAN [VOL #] 3 REP 1 RAND 1 Press [VOLUME] (PUSH SEL: select). 2 Turn [VOLUME]. Press [VOL "] or [VOL #] . 4 7 6 5 8 0 6 9 5 BAND SET DISP [DISP] (Display) Car Audio (Push) Push (page 32) [VOLUME "] [VOLUME #] [VOLUME "]: Right enhanced [VOLUME #]: Left enhanced Note: Press [DISP] (display) to return to the regular mode. If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume setting, 10 seconds in SQ adjustment), the display returns to the regular mode. When SBC-SW setting (page 11) has been selected to ON, the settings resulting from the adjustments performed at the subwoofer level and subwoofer low pass filter settings are reflected in the output. Balance/Fader You can adjust the sound balance among the front, rear, right and left speakers. Default: BAL (balance) CNT (center) FAD (fader) CNT (center) Setting range: 15 levels each Push [VOLUME "]: Front enhanced [VOLUME #]: Rear enhanced Subwoofer Level You can change the subwoofer volume level. [. . . ] Remember, if your car has a drive computer or a navigation computer, the data of its memory may be erased when the battery terminals are disconnected. The noise filter is a component that eliminates noise. It must be installed without fail in order to suppress radiation from the unit. Both analog and HD radio signals can be received using the regular antenna. [. . . ]