User manual PANASONIC CQ-DF100

[. . . ] It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly. Observe the following cautions when using this unit. Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. CAUTION LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. First Time Power On Model: CQ-DF100 Caution Take care not to damage the leads. When wiring, take care not to damage the leads. Prevent them from getting caught in the vehicle chassis, screws, and moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. [. . . ] ¡ Most major credit and debit cards accepted. ¡ All enquiries, transactions and distribution facilities are provided directly by Panasonic UK Ltd. ¡ Also available through our Internet is direct shopping for a wide range of finished products, so take a browse on our website for further details. Q'ty: 1 Installation Instructions Cleaning the Unit Face Plate Removing/Mounting Notes on CD-Rs/RWs (Anti-Theft System) "click" is heard. [ ] Matsushita Electric Industrial Co. , Ltd. Web Site: http://panasonic. net Notes: ¡ Specifications and design are subject to modification without notice due to improvements. ¡ Some figures and illustrations in this manual may be different from your product. YFM284C651CA PTW1206-1106 Printed in China Radio RA N Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. Do not use the product where it is exposed to water, moisture, or dust. Exposure of the unit to water, moisture, or dust may lead to smoke, fire, or other damage to the unit. Make especially sure that the unit does not get wet in car washes or on rainy days. Do not take apart this unit or attempt to make any changes yourself. This unit is a very intricate device that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays remain inside the cabinet. Therefore, never try to disassemble the player or alter any of its parts since you may be exposed to laser rays and dangerous voltages. The 24-hour system is used for the clock. 1 Press [DISP] (CLOCK). Deck Ass'y (in the unit, upper side) Installation Angle The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details. Observe the following cautions when installing. Refer wiring and installation to qualified service personnel. Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer. [6] [7] skip to the previous/next track in the player source. Hold down either of them for fast reverse/fast forward. indicator FM mode: Band/frequency APM Random indicator Play time Track Display change Press [DISP] (Display) to change the display. Player mode display (Default) Radio Source Display Band/frequency Printed side Clock display lights when a disc is in the player. Clock display BAND APM CQ-DF100 TUNE/TRACK Player Source Display APM SEL PWR SEL CLOCK DO TUNE/TRACK D·M BAND CQ-DF100 D·M Repeat indicator PWR CLOCK DO SRC MUTE 7 8 9 10 11 12 SQ/SCAN REP M 1 2 3 4 5 6 DISP [SRC] (Source) selects a source SRC MUTE 7 8 9 10 11 12 SQ/SCAN REP M 1 2 3 4 5 6 DISP [SRC] (Source) selects a source. (PWR) (Power) toggles power on/off. [MUTE] toggles mute on/off. [SQ] (Sound Quality) selects a sound type (SQ). Preset buttons [1] to [6] selects a preset station in the radio source, and presets the current [TUNE ]] [TUNE [] station. (Hold it down for more down/up the frequency. (Hold it down for more than 2 seconds. ) than 0. 5 seconds and release it for seek tuning. ) [DISP] (Display) (CLOCK) switches the information on the display. sets the clock time. [u] (Eject) ejects the disc. (y / 5) (Pause/Play) toggles pause/play in the player source. BAND Clock display SEL PWR TUNE/TRACK RA RA N N lights while receiving the D·M (Direct Memory) station. CQ-DF100 D·M CLOCK DO SRC MUTE 7 8 9 10 11 12 SQ/SCAN REP M 1 2 3 4 5 6 DISP [DISP] (Display) switches the information on the display. RA N [SRC] (Source) selects a source. [1] to [6] (7) to (12) (Hold down one of them for more than 2 seconds. ) select a track directly. Power On/Off Set your car's ignition switch to the ACC or ON position. SQ (Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type. Press [SQ] to select the sound type as follows: (FLAT) flat frequency response: does not emphasize any part. (Default) (ROCK) speedy and heavy sound: exaggerates bass and treble. [. . . ] ¡ If you insert an 8 cm disc and cannot eject it, turn the ignition key to the ACC OFF position once and turn the key to the ACC ON position again, then press [u] (Eject). ¡ Do not insert foreign objects into the disc slot. Random play All the available (tracks) are played in a random sequence. Scan play The first 10 seconds of each track is played in sequence. Source Selection Press [SRC] to change the source. General Operations 1 Select a band. 2 Hold down [BAND] (APM) for more than 2 Station Preset seconds. The preset stations under best receiving conditions are received for 5 seconds each after presetting the stations (SCAN). To stop scanning, press one of the buttons from [1] to [6]. [. . . ]