User manual PANASONIC CQ-DFX99

[. . . ] ¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov. ¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri. ¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. [. . . ] The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking. Never take measures especially for those other than indicated by italic letters in "Possible Solution" described below because those are too dangerous for users to handle themselves. Warning ¡ Do not use the unit in an irregular condition, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer. ¡ Never try to repair the unit by yourself because it is dangerous to do so. Problem Possible cause a Possible solution The power cord (battery, power and ground) is connected in the wrong way. a Eliminate the cause of fuse blowout and replace the fuse with new one. Consult your dealer. No power to the unit MUTE is set to ON. a Set MUTE to OFF. Sound is not generated. There is contact between the external mute lead and the chassis. a Connect the external mute lead correctly. The wiring of speaker lines are not correct, or a break or poor contact arises. a Move to an area where receivable stations number is maximum, and try presetting. Preset stations cannot be stored. The contact of the battery lead is poor, or the battery lead is not always powered. a Make sure that the battery lead is connected securely, and preset stations again. PS does not appear even if an RDS station is tuned in to. ("NO PS" appears. ) Receiving programs differs from PTY that was already set up. A PS code cannot be received for the reason of bad receiving conditions, etc. Wait for a while until conditions change. When the station changed between programs, the unit could not receive the PTY code. a An appropriate programme is searched for and tuned in to after receiving a corresponding PTY code. Therefore, wait for a while. "NONE" appears when selecting PTY. Any specified PTY programs cannot be received. There is no desired programme being broadcast in your area. a Select another PTY, or wait until a desired programme starts. The clock time (CT) is not accurate. The unit received a station broadcasting time that is not appropriate for you, or the unit is receiving a station that does not broadcast time. a Receive a station broadcasting time that is appropriate for your area, or adjust CT manually. RDS An AF station cannot be received even if AF indicator lights. There is little difference in receiving conditions between the current station and AF stations. a Wait until the AF list is successfully updated. For unstable reception, tune in to a stable station by the hand. 38 CQ-DFX99 Problem Possible cause a Possible solution The disc is inserted upside down. [. . . ] Switch unit Status indicator (Blue LED) lights: Call waiting/Talking stays out: Not connected blinks rapidly: Receiving a call blinks slowly: Pairing/Reconnecting [Hang-on]/Blue LED [Hang-up]/Red LED Preparation Note: This unit is designed only for receiving calls. It cannot send calls. 1 Press [Hang-on] on the Hands-Free The phone is in the incoming state. Phone System and pick up the phone. 2 Adjust the volume if necessary. 3 Press [Hang-up] on the Hands-Free Operation Flow Adjust the ring volume The ring volume is adjustable from this unit. (Setting range: OFF/LOW/MID/HIGH, Default: MID) [}]: up [{]: down Notes: ¡ The ring volume is adjustable only when receiving calls. [. . . ]