User manual PANASONIC CQ-DP101

[. . . ] ¡Läs igenom denna bruksanvisning noga innan produkten tas i bruk. Spara bruksanvisningen för framtida behov. ¡Si prega di leggere attentamente queste istruzioni prima di usare questo prodotto e di conservare questo manuale per usi futuri. ¡Lea con atención estas instrucciones antes de utilizar el producto y guarde este manual para poderlo consultar en el futuro. [. . . ] Immediately stop using the unit and consult your dealer. ¡ Never try to repair the unit by yourself because it is dangerous to do so. Problem Possible cause a Possible solution The power cord (battery, power and ground) is connected in the wrong way. a Eliminate the cause of fuse blowout and replace the fuse with new one. Consult your dealer. No power to the unit MUTE is set to ON. a Set MUTE to OFF. Sound is not generated. There is contact between the external mute lead and the chassis. a Connect the external mute lead correctly. The wiring of speaker lines are not correct, or a break or poor contact arises. a Check the wiring in accordance with the wiring diagram. (Installation Instructions) Common Noise There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines. a Keep an electromagnetic-wave generator such as a cellular phone away from the unit and the wiring of the unit. In case that noise cannot be eliminated due to the wiring harness of the car, consult your dealer. a An appropriate programme is searched for and tuned in to after receiving a corresponding PTY code. Therefore, wait for a while. "NONE" appears when selecting PTY. Any specified PTY programs cannot be received. There is no desired programme being broadcast in your area. a Select another PTY, or wait until a desired programme starts. The clock time (CT) is not accurate. The unit received a station broadcasting time that is not appropriate for you, or the unit is receiving a station that does not broadcast time. a Receive a station broadcasting time that is appropriate for your area, or adjust CT manually. An AF station cannot be received even if AF indicator lights. There is little difference in receiving conditions between the current station and AF stations. a Wait until the AF list is successfully updated. For unstable reception, tune in to a stable station by the hand. CQ-DP101/C7303N Troubleshooting 39 RDS English Troubleshooting Problem Possible cause a Possible solution The disc is inserted upside down. There is a flaw or foreign material on the disc. a Remove the foreign material, or use a flawless disc. No playback or disc ejected Sound skipping or noise There is a flaw or foreign material on the disc. a Remove the foreign material, or use a flawless disc. CD Sound skipping due to vibration The unit is not sufficiently secured. The unit is tilted at over 30° in the front-to-end direction. [. . . ] 3 Press [Hang-up] on the Hands-Free Operation Flow Adjust the ring volume The ring volume is adjustable from this unit. (Setting range: OFF/LOW/MID/HIGH, Default: MID) [}]: up [{]: down Notes: ¡ The ring volume is adjustable only when receiving calls. ¡ The ring volume is adjustable only when the phone ring comes out of the main unit. Phone System and hung up the phone. Reject calls Pressing [Hang-up] allows users to reject a call when the call is coming in. Bluetooth disconnection/reconnection Pressing [Hang-up] allows users to temporarily disconnect when the phone is in the waiting state. Pressing [Hang-up] allows users to reconnect when the Bluetooth unit is temporarily disconnected. 14 CQ-DP101/C7303N Notes: ¡ This item is not selectable by pressing [SRC] (PWR: POWER), but activated by receiving an incoming call. [. . . ]