User manual PANASONIC CQ-DP730

[. . . ] ¡Lea estas instrucciones cuidadosamente antes de usar este producto y guarde este manual para usar como referencia futura. Safety Information Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. The meanings of the pictographs are explained below. [. . . ] 3 Press [}], [{], []] or [[] to select the other station to be interchanged. 4 Press [BAND] to confirm your selection. Calling an FM station registered on D·M. Station Preset Auto Preset Memory (APM) Stations with good receiving conditions are automatically preset. 1 Select a band. or more. The preset stations under best receiving conditions are received for 5 sec. each after presetting the stations (SCAN). Note: New stations overwrite existing saved stations. RADIO AUDIO FILTER Frequency/preset number blinks once. Notes: ¡ New stations overwrite existing saved stations. ¡ In step 2, a station can be registered by holding down the numeric button [1] to [6] for 2 sec. ¡ To stop presetting stations, press [DISP] (Display). MONO (Monaural) Noise reduction when the signal strength decreases : Receiving in stereo (default) : Receiving in mono and reducing the noise level You can select the reception status (band) of FM stations registered on D·M. : OFF (default) : High cut level 1 : High cut level 2 LOCAL Setting when searching for a station : Searching even for a relatively low-intensity radio wave station (default) : Searching only for a high-intensity radio wave station 22 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U Radio 23 English 1 Press [MENU] to IF filter setting for noise suppression : Wide range CD Player When a disc is already loaded, press [SRC] (Source) to select the CD mode. plate. SRC CS When a disc is already loaded ( will automatically be ejected. lights), the disc Operation Flow 2 Load a disc with the label-side facing up. The face plate closes automatically, and the unit recognizes the disc and starts playing automatically, too. 3 Select a desired track. Track selection [7] (TRACK): Next track [6] (TRACK): Preceding track (press twice) Note: Hold down for fast forward/reverse. Random and Repeat play can be set. Random, Repeat Play (CD Menu Display) 1 Press [MENU] to display the menu display. For using the remote control, hold down [MENU] for 2 sec. or more. RANDOM : Off (default) : Random playback Pause Press [BAND] (h / 5). Press again to cancel. (RANDOM, REPEAT) 4 Press [ disc. Track number ] (OPEN/eject) to eject the 2 Press [}] or [{] to select a mode to be adjusted. REPEAT : Off (default) : Playing the current track repeatedly Time 3 Press [BAND] (SET) to adjust. TEXT Text display : Enabled (default) : Disabled 4 Press [MENU] to confirm the adjustment. For using the remote control, hold down [MENU] for 2 sec. or more. CD mode display Functions only by remote control unit CD-TEXT display Notes: ¡ For scrolling text, hold down [DISP] for 2 sec. One-touch operation is available for selecting a file playing style by use of [RANDOM] or [REPEAT]. Direct Access A file in the current folder can be directly selected. Example: file number 5 1 Press [#] (NUMBER). Notes: ¡ For folder selection, enter a number after pressing [#] (NUMBER) twice. ¡ If there is no playable file in the selected folder, the first file or folder on the disc is selected. ¡ To suspend direct selection, press [DISP] (Display). Functions only by remote control unit RANDOM, REPEAT Press the button. Press again to cancel. FOLDER RANDOM, FOLDER REPEAT Hold down the button for 2 sec. Hold down again to cancel. (Folder Random) (Folder Repeat) (Folder Scan) SCAN play You can find your favorite file by playing first 10-sec. of each file. SCAN (All files) Press [SCAN]. Press again to cancel. FOLDER SCAN (1st file in each folder) Hold down [SCAN] for 2 sec. Hold down again to cancel. 26 CQ-C9901U/C9801U/C9701U CQ-C9901U/C9801U/C9701U MP3/WMA Player 27 FOLDER REPEAT English 1 Press [ Notes: ¡ Refer to the section on "Notes on MP3/WMA" (a page 28) ¡ This unit does not support a MIX mode CD (a CD containing both CD-DA and MP3/WMA data). In case of using such a CD, problems may occur such as anacoustic playback. MP3/WMA Player What is MP3/WMA? MP3 (MPEG Audio Layer-3) and WMA (Windows MediaTM Audio) are the compression formats of digital audio. [. . . ] a Eject the disc. Notes on CD/CD Media (CD-ROM, CD-R, CD-RW) (After 5 seconds) To next file automatically A WMA file can be copyrighted. a The file protected by copyright is not playable. Notes on Discs If you use commercial CDs, they must have either of these labels shown at right. Some copy-protected music CDs are not playable. TEXT No disc. How to hold the disc ¡ Do not touch the underside of a disc. ¡ When not in use, keep a disc in the case. Label side Disc is dirty, or is upside down. [. . . ]