User manual PANASONIC CQ-5100U

[. . . ] Heavy Duty CD player/Weather Band Receiver Model: CQ-5100U Operating Instructions · Please read these instructions (including "Limited Warranty" and "Customer Services Directory") carefully before using this product and keep this manual for future reference. Safety Information Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. This pictograph intends to alert you to the presence of important operating instructions and installation instructions. [. . . ] · Do not use irregular shaped discs. · Do not use discs that have a seal or label attached. · Do not insert foreign matter into the disc slot. Pause · Press [BAND] (h/ 5). · Press again to cancel. Track Selection Press [d TUNE]: Advance to the next track. Press [s TUNE]: Back to the beginning of the current track. (Press twice. ) Track Search Hold down. . . [d TUNE]: Fast forward [s TUNE]: Fast reverse Release to resume the regular play. Repeat play · Press [5] (REPEAT) . · Press [5] (REPEAT) again to cancel. lights Random play · Press [6] (RANDOM). All the tracks are played in random order. · Press [6] (RANDOM) again to cancel. lights Scan play · Press [4] (SCAN). The first 10 seconds of each track on the disc are played in sequence. · Press [4] (SCAN) again to cancel. blinks 15 CQ-5100U AUX (Auxiliary Input Mode) Before Using the Portable Audio Device Warning ¡ Do not place the connected portable audio device or mini-plug cable in a location where it will prevent the SRS airbag may not operate correctly or the portable audio device may be catapulted outward by the deploying airbag, which may result in serious injury or death. *Refer to the owner's manual for your car regarding the deploying position of the SRS airbag. ¡ Please or temporarily fix the portable audio device and mini-plug cable where they will not interfere the driver when driving. Otherwise, they may interfere driving or cause auto accident. Connecting with the portable audio player The AUX input terminal is equipped on the front panel. This jack is used to connect a portable audio device using a standard mini-plug cable. By connecting a commercially available portable audio device, this unit can play the music recorded on the device. The AUX Input Example: Main Unit CQ-5100U Silicon audio player, HDD audio player etc. (Option) Front AUX IN (3. 5 mm ø stereo) Stereo line out (3. 5 mm ø) 3. 5 mm ø stereo mini-plug cable (Option) Caution · Set the volume level to low enough before the AUX connection is completed. Failure to observe this may cause loud noise and, consequently, damage your speakers and your hearing. · Do not connect this AUX directly with a speaker/ headphone output. Failure to observe this may distort sound and break the internal amplifier. Notes: · When the high impedance output enuipment such as old type audio equipment with an output transformer is connected, sound may be distorted or become extremely low levels. [. . . ] · Disconnect the cable from the negative @ battery terminal (see warning and caution below). · Remove Mounting Collar q from the main unit temporarily, which are already mounted at shipment. * Caution Various settings that have been stored in the memory in other on-board equipment (vehicle navigation etc. ) may be lost if the battery terminals are disconnected. Therefore, we recommend to make a record of or to back up the settings before disconnecting the terminals. After completing installation of the main unit, set the equipment again according to the record. [. . . ]