User manual PANASONIC CQ-DF801U

[. . . ] · CD-ROM playback · CD text display · MP3/WMA playback · Pause CD-R/RW playback is not supported when connecting Panasonic CD changer CX-DP88, etc. , (option). CD changer mode display Direct Disc Selection CQ-DF983W Example: disc number 10 1 Press [#] . E N G L I S H 20 2 Press [1] [0]. 3 Press [BAND]. 1 CD Changer Mode (When a CD changer is connected and a magazine is in the changer. ) Press [SOURCE] to change to CD changer mode. Playback starts automatically. Note: Press [DISP] (display) to return to the regular mode. Lights when the changer is connected. [. . . ] Discs that have CD-DA type data should be used. The unit may not successfully play back a CD-R/RW that is made in combination of writing software, a CD recorder (CD-R/RW drive) and a disc which are incompatible one another. Refer to instructions for the concerned devices for details. Clean disc, referring to the section on "Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)". (page 47) The unit may not successfully play back a CD-R/RW that is made in combination of writing software, a CD recorder (CD-R/RW drive) and a disc which are incompatible one another. Refer to instructions for the concerned devices for details. Adjust mounting angle to less than 30x. Mount the unit securely with the mounting parts, referring to the section on installation. Press [OPEN] to open the panel and press [<] (eject). If normal operation is not restored, call the store where you purchased the unit or the nearest service station to ask for repairs. Select another folder which contains MP3/WMA files. Do not leave discs on the following places: Direct sunlight Near car heaters Dirty, dusty and damp areas Seats and dashboards Disc cleaning Use a dry, soft cloth to wipe from the center outward. <Right> <Wrong> Maintenance Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry, soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvents. Replacing the Fuse Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or connecting the unit directly without a fuse, could cause fire or damage to the unit. If the replacement fuse fails, contact your nearest Panasonic service station for service. Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic service station. The product should be serviced only by a qualified technician. Do not attach any seals or labels to your discs. Do not write on the disc label in a heavy pen or ballpoint pen stroke. 46 CQ-DF983/DF903W CQ-DF983/DF903W 47 E N G L I S H 37 Installation Guide Identify All Leads WARNING This installation information is designed for experienced installers and is not intended for non-technical individuals. It does not contain warnings or cautions of potential dangers involved in attempting to install this product. Any attempt to install this product in a motor car by anyone other than a qualified installer could cause damage to the electrical system and could result in serious personal injury or death. If you encounter problems, please consult your nearest professional installer. Q'ty 1 1 1 1 1 1 1 2 Before you begin installation, look for the items which are packed with your unit. [. . . ] 8 Lock cancel plate The security indicator blinks when the removable face plate is removed from the unit. This function is activated when the security function is on. (page 38) Security indicator 2 Pull out the unit while pushing the plates further inside. Panel Removal Alarm This alarm sounds to warn you not to forget to remove the panel before leaving your car. This function is activated when the security function is on. [. . . ]