User manual PANASONIC CQ-DP710EUC

[. . . ] If you do so, you may damage or break the glass on the top surface of the touch panel. Do not use a pen or other sharp implement to perform touch panel operations. If you do so, you may damage or break the glass on the top surface of the touch panel. Performing operations while the top surface of the touch panel is covered with dust may damage the glass on the top surface of the touch panel. [. . . ] (Press [1] to [6] on the remote control unit. ) 22 CQ-DP710EUCW CQ-DP710EUCW 23 E N G L I S H 9 CD Player Disc Insert and Playback 1 Open theonfront panel. Press [OPEN] the front panel. SOURCE DISPLAY < (Eject) Close MOSFET [OPEN] OPEN 50W X 4 MENU VOL Caution: Only 12 cm CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit. This unit does not support CD text display. This unit does not support MP3 disc playback. Refer to page 47 about notes on CD-Rs/RWs. To avoid damaging the front panel, do not push it down or place objects on it while it is open. Do not use discs that have a seal or label attached. Do not insert foreign matter into the disc slot. The back side of the front panel becomes hot during use, but this is not an indication of any problem. Do not touch anything here except [<] (eject). The disc insertion slot and its vicinity become hot, but this is not an indication of any problem. Playback starts automatically. Direct Disc Selection Only for the remote control unit Example: disc number 10 1 Press [, , ] (NUMBER). E N G L I S H 14 2 Press [1] [0]. 3 Press [SET] to set. The first track of the corresponding disc starts playing. Note: Press DISPLAY /[DISP] (display) or [, , ] (NUMBER) to return to the regular mode. If a non-existent disc number is input and entered, the command is invalid and the display returns to regular mode. 1 CD Changer Mode Note: : Load a magazine with CDs. : Magazine is ejected in the CD changer mode. Press DISC or TRC to change the cursor. Lights when the changer (magazine) is connected. DISC MOSFET SOURCE DISPLAY TRC (Track) Display Change Press DISPLAY /[DISP] (display) to change the display. Disc/track number (Default) Track playing time Clock display 50W X 4 MENU VOL BAND APM/ ;/ 1 (Disc) (Track) Note: Press DISPLAY /[DISP] (display) to return to the regular mode. 2 Disc Selection /["]: Next disc. /[#]: Previous disc. DISPLA (SOURCE) SOURCE PWR BAND RETURN RET MENU Y FACE S·A DIMMER 3 Track Selection Track Search Press and hold. /[$]: Fast forward /[%]: Fast backward Release to resume the regular play. [DISP] (Display) [, , ] (NUMBER) DISP DIM [%] [$] (Track) ["] [#] (Disc) [SET] [0] to [9] (Disc number) 1 2 3 4 RANDOM 5 SCAN 6 REPEAT VOL 7 8 9 /[$]: Advance to the next track. /[%]: Back to the beginning of the current track. (Press twice. ) 0 NUMBER MUTE Car Audio 28 SE T CQ-DP710EUCW CQ-DP710EUCW 29 E N G L I S H 15 CD Changer Control (Continued) Menu Setting on CD Changer Mode 1 Menu VOL 1 [MENU] MOSFET 2 Submenu MOSFET 3 Setting 50W X 4 MENU 50W X 4 MENU VOL VOL BAND APM/ ;/ 1 BAND APM/ ;/ 1 2 SET : Lights during menu play setting. [. . . ] : Bright : Medium : Dark (See page 32 for information on changing the brightness of the entire front panel. ) OPEN Direct setting on the remote control unit when the menu is not displayed Press [DIM] (DIMMER) to change setting. (When you press a button, the screen on the left is displayed for 2 seconds. ) VOL MENU BAND 50W X 4 MENU VOL BAND on APM/ ;/ 1 Default: DIMMER 3 Setting range: DIMMER 1 to 3 on APM/ ;/ 1 Press or /["] or [#] to change setting. : S·A off (regular display) : S·A 1 : S·A 2 : S·A 3 : S·A 4 : S·A 5 Press [S·A] to change setting. (When you press a button, the screen on the left is displayed for 2 seconds. ) Spectrum Analyzer (S·A) Display Pattern Default: KEY Variety: KEY, PATTERN 1 to 5 1 Press [MENU]. [. . . ]