User manual PANASONIC CS-Z35VKEW

[. . . ] Before operating the unit, please read these operating Instructions thoroughly and keep them for future reference. The included Installation Instructions should be kept and read By the installer before installation. Remote control is packaged in the indoor unit and removed By the installer before installation. A new built-in Network Adaptor that allows you to control your heatpump from everywhere. [. . . ] 2 Set a password for new air conditioner model to complete the registration. Select the air-condioner for registraon *If Wireless LAN LED is OFF, please press "Wireless LAN" buon once to enable the Wireless LAN before proceed for step 1. Press and hold "Wireless LAN" buon for 5 secs unl easy seng "1" is shown. 3 Password must be 8-15 characters with letters and number. Keep password for future used on additional user registration. Input the password to complete the registraon. Password must be 8-15 characters with leers and numbers. Aer step 1 ~ 3 have been done, tap "Next". 1 Once connection is established between the app and the new air conditioner through the registration process, set the preferred name for this air conditioner to helps identify it. By registered the new name of air conditioner, the function of "Panasonic Comfort Cloud" app is ready to be used. 2 Beside operation control, this application can monitor the estimated energy consumption and do comparison for different time frame by referring to the statistic's graph. User's manual can be found under Menu tab. Enter your preferred name for this air-condioner How to use The APP is not guaranteed to work with all versions of Android OS. Ensure the router's LAN signal reaches the unit, the SSID is not hidden, the MAC address setup is enabled for the unit, the router's dual band signal is enabled for 2. There is a possibility that you are using a smartphone or wireless router that is not supported or connection method is different. Refer to the smartphone and router installation manual for detail. Set the additional unit setting follow to the first unit initial setup. It is recommended to name each of the registered air conditioner units for easy to distinguish. Once the air conditioner is registered, input the preset device password (set by first user). Approval from administrator (first user) is required to complete the registration. For administrator approval, select the . menu Choose "Owner" and select "User List" to approve additional user. [. . . ] Press and hold "Wireless LAN" buon for 5 secs unl easy seng "1" is shown. Aer step 1 ~ 3 have been done, tap"Next". By changing the wireless network connecon of smartphone to the following network. Select the following SSID from the network list in the wireless Z Z ^^/WZ^W WZZ Copy password and next ZZZ ZZ ZZ Next, setup the wireless network connecon of air-condioner. [. . . ]