User manual PANASONIC CS-HZ9RKE

[. . . ] Before operating the unit, read these operating instructions thoroughly and keep them for future reference. Indb 1 30/6/2015 6:47:41 PM Dansk Suomi Norsk Svenska English Provide maximum comfort, clean air and optimise energy saving ECONAVI + INVERTER The Perfect Energy Saving Technology ECONAVI detects where energy is normally wasted and adjusts cooling/heating power depending on room conditions and activity levels. Indb 2 30/6/2015 6:47:42 PM Quick guide Table of contents Inserting the batteries 1 3 2 1 Pull out the back cover of remote control 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover 2 3 Safety precautions . 11 Clock setting 1 Press CLOCK 2 Set the time 1 3 Confirm Accessories • Remote control • AAA or R03 batteries × 2 • Remote control holder • Screws for remote control holder × 2 English Basic operation AIR CONDITIONER MODE 1 Select the desired mode HEAT COOL AUTO FAN DRY 2 Start/stop the operation 2 1 3 WARNING POWER • Please note that the OFF indication is on to start. [. . . ] Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. Power supply Do not use a modified cord, joint cord, extension cord or unspecified cord to prevent overheating and fire. To prevent overheating, fire or electric shock: • Do not share the same power outlet with other equipment. € Do not over bend the power supply cord. € Do not operate or stop the unit by inserting or pulling out the power plug. If the supply cord is damaged, it must be replaced by the manufacturer, service agent or similarly qualified persons in order to avoid a hazard. € Dust on the power plug should be periodically wiped with a dry cloth. Stop using the product if any abnormality/ failure occurs and disconnect the power plug or turn off the power switch and breaker. € Abnormal noise or vibration of the unit is observed. € The unit stops running immediately even if it is switched on for operation. € The fan does not stop even if the operation is stopped. Contact your local dealer immediately for maintenance/repair. This equipment must be earthed to prevent electrical shock or fire. Prevent electric shock by switching off the power supply and unplug: - Before cleaning or servicing, - When extended non-use, or - During abnormally strong lightning activity. remote control Do not use rechargeable (Ni-Cd) batteries. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. € New batteries of the same type must be inserted following the polarity stated. Power supply Do not disconnect the plug by pulling the cord to prevent electric shock. € Defrost operation at outdoor unit 10˚C will result in sudden cold air from indoor unit. POWERFUL/QUIET To switch between powerful & quiet QUIET NORMAL POWERFUL POWERFUL: To reach temperature quickly POWERFUL To select fan speed (Remote control display) • This operation stops automatically after 20 minutes. qUIET: To enjoy quiet operation QUIET • This operation reduces airflow noise. [. . . ] Indb 8 30/6/2015 6:47:46 PM Cleaning instructions To ensure optimal performance of the unit, cleaning has to be carried out at regular intervals. Dirty unit may cause malfunction and you may see error code “H99”. € Switch off the power supply and unplug before cleaning. € Do not touch the aluminium fin, sharp parts may cause injury. [. . . ]