User manual PANASONIC CS-RE12NKE

[. . . ] Il coperc Man IDA o oder used la batteri ri Chiude AAA batteriR03 R03 ser les the AAA do / hio e usado ~ jen A re cover ou R03 (pu einleg enviro1 year) batteri Il coperc 2 ANTI-BACTERIAL FILTER Select Slect 3 MOD Select DRY O Slect HEA Selecc the E Gewn ionnez COO T Selezi ione desire Select schte le d mode Selecc onare el modo mode. CU-RE9NKE CU-RE12NKE CU-RE15NKE Before operating the unit, read these operating instructions thoroughly and keep them for future reference. BACK COVER NOTE: The illustrations in this manual are for explanation purposes only and may differ from the actual unit. They are subjected to change without notice for future improvement. [. . . ] This equipment must be earthed to prevent electric shock or fire. In HEAT mode, if AUTO is set, the horizontal louver fix at predetermined position. b QUI ET POWE RFUL A SEL ECT CHECK ERROR RESET RESET SET/CA NCEL AIR CON DITIO NER 6 (GREEN) (GREEN) (ORANGE) (ORANGE) (GREEN) (RED) TO ACHIEVE TEMPERATURE QUICKLY This setting enables the desired set temperature to be reached quickly. 7 TO ENJOY QUIET ENVIRONMENT Press the remote control's button 1 TO TURN ON OR OFF THE UNIT This setting provides a quiet environment by reducing the airflow noise. POWERFUL AND QUIET operations can not be activated at the same time. 8 9 PRESS TO RESTORE THE REMOTE CONTROL'S DEFAULT SETTING NOT USED IN NORMAL OPERATIONS Please be aware of the OFF indication on the remote control display to prevent the unit from starting/stopping improperly. Operating the unit within the recommended temperature could induce energy saving. During operation mode selection the power indicator blinks. Unit selects the operation mode according to the indoor intake temperature and remote control temperature. hEAT mode - To enjoy warm air In heat mode, it may take a while for the unit to warm up. The POWER indicator blinks during preheating. cOOL mode - To enjoy cool air Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. dRY mode - To dehumidify the environment Unit operates at low fan speed to give a gentle cooling operation. 4 TO SELECT FAN SPEED (5 OPTIONS) 1 4 7 3 2 5 6 9 8 FAN SPEED For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. 10 TO SET THE TIMER (12-HOUR TIMER SETTING) When you want the air conditioner to turn ON or OFF automatically. DELAY ON AND OFF TIMER For example, to start the air conditioner 7 hours later and stop 10 hours later. 1 To select the Delay ON and OFF Timer, press the button twice repeatedly. 3 Press the button to select the delay hour for DELAY OFF-TIMER For example, to stop the air conditioner 5 hours later. 1 To select the Delay OFF-TIMER, press the button once. 2 Press the button to select the delay hour. The OFF-TIMER can only be set while the airconditioner is in operation. DELAY ON-TIMER For example, to start the air conditioner 2 hours later. [. . . ] Indoor fan stops occasionally during automatic fan speed setting. Operation is delayed a few minutes after restart. The unit operates automatically when power is resumed after a power failure. Indoor fan stops occasionally during heating operation. [. . . ]