User manual PANASONIC CS-SC12BKN

[. . . ] Otherwise, fire or other hazard may occur. 1 Operation Precautions Warning Insert the power plug properly. Heat generated by a loose power plug could cause electric shock, overheated or fire. Do not pull out the power plug when the unit is operating. Otherwise, electric shock or fire may occur due to overheating. [. . . ] If it were manually adjusted, the proper mechanism of the louvers may be affected. If such a case, turn off the air conditioner temporarily and then restart the operation. Cooling Soft Dry About 30° During Cooling and Soft Dry operations, please avoid the vertical airflow direction louvers from positioning in a downward direction for a long period. Otherwise, if condensation occured near the airflow direction louver and air outlet vents, it may result in water dripping. About 60° Horizontal Airflow The Left and Right Air Flow direction be manually controlled. To adjust the horizontal airflow direction, manually move the Horizontal Airflow Direction Louver. After the air conditioner stopped and restarted immediately, the compressor will not operate within 3 minutes. (For compressor protection purposes. ) To move the Left-Right Air Flow Direction Louver by hand. 6 Automatic Operation 1. Press operation selection MODE button, the cursor key point to AUTO , 2. Press operation OFF/ON button, the operation lamp of the air conditioner will flash momentarily, and then lights up. During Automatic Operation, the operation mode will be selected automatically in accordance with the room temperature. Inlet air temperature Cooling Operation Soft Dry Operation 2. During Automatic Operation, the adjustable temperature range is ±2°C. By pressing or will appear in the remote control display accordingly. During Automatic Operation with AUTO Fan Speed, or button, Cooling: Auto Fan Speed will run at a High fan speed initially. It stops when it reaches the set temperature. Then, it will start operating again at Low fan speed. During Cooling and Soft Dry operations, the Fan will start operating 40 seconds later. Cooling Operation 1. Press operation selection MODE button, the cursor key point to COOL ; 2. Press operation OFF/ON button, the operation lamp of the air conditioner will light up. Press or button to set the room temperature. Notes: When setting the automatic airflow during Cooling Operation, changes in speed and movements of louvers, which swing in up and down manner forms a natural breeze condition. ENGLISH Soft Dry Operation 1. Press operation selection MODE button, the cursor key point to DRY ; 2. Press operation OFF/ON button, the operation lamp of the air conditioner will light up. Press or button to set the room temperature. Notes: 1. The purposes of Soft Dry Operation : to maintain the room temperature at the set temperature, prior to dehumidification. When setting the automatic airflow during Soft Dry Operation, changes in speed and movements of louvers, which swing in up and down manner forms a natural breeze condition. During Soft Dry Operation, the fan will run at Low fan speed, and on/off operation will occur occasionally. [. . . ] 2) If the supply cord is damaged or need to be replaced, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. 3) Remove power plug or disconnect from the mains before servicing this appliance. In case of malfunction of this appliance, do not repair by yourself. Contact to the sales dealer or service dealer for a repair. [. . . ]