User manual PANASONIC CS-UE9PKE

[. . . ] Confirm with authorised dealer or specialist on usage of any specified refrigerant type. Using refrigerant type other than the specified may cause product damage, burst and injury etc. Do not install the unit in a potentially explosive or flammable atmosphere. Do not insert your fingers or other objects into the air conditioner indoor or outdoor unit, rotating parts may cause injury. [. . . ] Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. Wires live neutral earth colours (IEC Standard) brown blue green-yellow Wiring colour may vary depending on a country wiring code’s standard. This equipment must be earthed to prevent electrical shock or fire. Prevent electric shock by switching off the power supply and unplug: - Before cleaning or servicing, - When extended non-use, or - During abnormally strong lightning activity. remote control Do not use rechargeable (Ni-Cd) batteries. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. € New batteries of the same type must be inserted following the polarity stated. Power supply Do not disconnect the plug by pulling the cord to prevent electric shock. Indd 5 2012-11-7 15:44:23 English Safety precautions WARNING CAUTION 5 How to use To turn on or off the unit To set temperature To select fan speed (5 options) (Remote control display) Remote control receiver and indicator POWER TIMER QUIET POWERFUL (GREEN) (ORANGE) (GREEN) (RED) • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. To enjoy quiet environment • This setting provides a quiet environment by reducing the airflow noise. Raise the front panel: • To use in AUTO mode, press the button once. € To use in COOL mode, press and hold the button until 1 beep is heard, then release. € To use in HEAT mode, press and hold the button until 1 beep is heard, then release. And press again until 2 beeps, then release. Indd 6 2012-11-7 15:44:24 AUTO mode - For your convenience • During operation mode selection the power indicator blinks. € Unit selects the operation mode according to the indoor intake temperature and remote control temperature. HEAT mode - To enjoy warm air • In heat mode, it may take a while for the unit to warm up. COOL mode - To enjoy cool air • To reduce power consumption during COOL mode, use curtains to screen off sunlight and outdoor heat. DRY mode - To dehumidify the environment • Unit operates at low fan speed to give a gentle cooling operation. 2 1 A B SELECT SET/CANCEL 3 • To turn ON the unit at a preset time. [. . . ] Power indicator blinks before the unit is • This is a preliminary step in preparation for the switched on. € Changes of temperature cause the expansion/ contraction of the unit. Symptom Cause Check the following before calling for servicing. Symptom Check Operation in COOL/HEAT mode is not working • Set the temperature correctly. [. . . ]