User manual PANASONIC CS-UZ18SKE

[. . . ] Operating Instructions Air Conditioner Operating Instructions Air Conditioner 2-11 Thank you for purchasing this Panasonic Air conditioner. Before operating the unit, please read these operating instructions thoroughly and keep them for future reference. Indoor Unit 12-21 Outdoor Unit English Quick guide Inserting the batteries 1 Pull out the back cover of remote control 2 Insert AAA or R03 batteries (can be used ~ 1 year) 3 Close the cover Clock setting 1 Press CLOCK 2 Set the time 3 Confirm Basic operation 1 Select the desired mode AUTO DRY HEAT COOL 2 Start/stop the operation POWER • Please note that the display to start the unit. indication is on 3 Select the desired temperature • Selection range: 16 °C ~ 30 °C. [. . . ] Do not place a vase or water container on the unit. Water may enter the unit and degrade the insulation. Do not open window or door for long time during operation, it may lead to inefficient power usage and uncomfortable temperature changes. Precaution for using R32 refrigerant Pay careful attention to the following points when operating the appliances and dealing with different refrigerants. Since the working pressure is higher than that of refrigerant R22 models, some of the piping and installation and service tools are special. Especially, when replacing a refrigerant R22 model with a new refrigerant R32 model, always replace the conventional piping and flare nuts with the R32 and R410A piping and flare nuts on the outdoor unit side. For R32 and R410A, the same flare nut on the outdoor unit side and pipe can be used. Models that use refrigerant R32 and R410A have a different charging port thread diameter to prevent erroneous charging with refrigerant R22 and for safety. ] Be more careful than R22 so that foreign matter (oil, water, etc. Also, when storing the piping, securely seal the opening by pinching, taping, etc. ) This appliance shall be stored in a well ventilated area. This appliance shall be stored in a room without continuously operating open flames and ignition sources. This appliance shall be stored so as to prevent mechanical damage from occurring. 6 Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. do not use rechargeable (Ni-Cd) batteries. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. € New batteries of the same type must be inserted following the polarity stated. Power supply Do not disconnect the plug by pulling the cord to prevent electric shock. Safety precautions Remote control English 7 How to use To switch between powerful & quiet POWERFUL QUIET NORMAL POWERFUL: To reach temperature quickly • This operation stops automatically after 20 minutes. qUIET: To enjoy quiet operation • This operation reduces airflow noise. MODE Remote control display Remote control receiver and indicator POWER (Green) TIMER (Orange) To select operation mode AUTO mode - For your convenience • During operation mode selection the power indicator blinks. [. . . ] 1 Press for 3 Press for 5 seconds 2 Press until you ON TIMER OFF CANCEL SET hear beep sound, then write down the error code and reveal the error code to authorised dealer 5 seconds to quit checking 4 Turn the unit off • For certain errors, you may restart the unit for limited operation with 4 beeps when operation starts. € This may be due to damp smell emitted by the wall, carpet, furniture or clothing. Indoor fan stops occasionally during automatic • This helps to remove the surrounding odour. Airflow continues even after operation has • Extraction of remaining heat from the indoor unit stopped. [. . . ]