User manual PANASONIC CS-VE12NKE

[. . . ] · Do not use for other purposes such as preservation of food. · Do not use any combustible equipment in front of the airflow outlet. · Do not expose directly to cold air for a long period. · Ensure that the drainage pipe is connected properly. [. . . ] After waxing, aerate the room properly before operating the unit. · Do not install the unit in oily and smoky areas. 3 ENGLISH PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS e-ion AIR PURIFYING SYSTEM Do not touch during operation e-ion filters Front panel Active e-ion Power Module Active e-ion Generator Auto OFF/ON button · Used when remote control is misplaced or malfunction. Press and hold until 1 beep is heard, then release. Mode Auto Cooling INDICATOR Airflow direction louver · Do not adjust by hand. Receiver (Green) (Orange) (Orange) (Orange) (Blue) tan ces :8 m um dis TO TURN ON OR OFF THE UNIT · Please be aware of the OFF indication on the remote control display to prevent the unit from starting/stopping improperly. TO SET TEMPERATURE Remote control display Ma xim · For cool and dry modes, the range of temperature for selection is 16°C ~ 30°C. · Operating the unit within the recommended temperature could induce energy saving. DRY mode : 1°C ~ 2°C lower than room temperature. TO SELECT OPERATION MODE AUTO mode - For your convenience · Unit selects the operation mode according to the room temperature. · Once auto mode is selected, the unit will operate at the standard setting temperature. · To change the standard setting temperature, press for "HI" or for "LO". In this condition, fan speed and air swing can not be adjusted. 5 ENGLISH TO SELECT FAN SPEED (3 OPTIONS) TO SET THE TIMER CARE & CLEANING CAUTION · Switch off the power supply and unplug before cleaning. · Do not touch the aluminium fin, sharp parts may cause injury. HINTS · Clean the filter regularly for best performance and to reduce power consumption. · Please consult your nearest dealer for seasonal inspection. WASHING INSTRUCTIONS · Do not use benzene, thinner or scouring powder. · Use only soap ( pH7) or neutral household detergent. · Do not use water hotter than 40°C. ALUMINIUM FIN FRONT PANEL Raise and pull to remove. Wash gently and dry. INDOOR UNIT Wipe the unit gently with a soft, dry cloth. Remove ACTIVE e-ion GENERATOR Clean with dry cotton bud. · Active e-ion generator cleaning is recommended every 6 months. e-ion FILTERS · Clean the filters regularly. · Wash/rinse the filters gently with water to avoid damage to the filter surface. · Dry the filters thoroughly under the shade, away from fire or direct sunlight. [. . . ] Select QUIET operation to maintain the airflow consistency. Check the following before calling for servicing. Symptom Cooling operation is not working efficiently. Clear any obstruction at the air inlet and air outlet vents. Check if the unit has been installed at an incline. [. . . ]