User manual PANASONIC CS-XE12SKEW

[. . . ] Before operating the unit, please read these operating instructions thoroughly and keep them for future reference. 52-61 ACXF55-01530 Nederlands Italiano Deutsch Español Français English Provide maximum comfort, clean air and optimise energy saving ECONAVI + INVERTER The Perfect Energy Saving Technology ECONAVI detects where energy is normally wasted and adjusts cooling/heating power depending on room conditions and activity levels. Nanoe For a freshness and cleaner environment nanoe generates negative ions using the air in the room to give a healthy air. It also provides moisturizing effect on the skin or hair and reduces the smell in the room and constrains propagations of mold and bacteria. [. . . ] It will automatically adjust the sleep pattern temperature during the activation period. € The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator brightness has been manually dimmed. € This operation can be set together with single timer or twin timer. Sleep operation has the priority over OFF timer. € This operation can be cancelled by pressing the respective button when the sleep timer reaches 0. OFF/ON MODE MILD DRY TEMP SLEEP AIR SWING FAN SPEED ON TIMER OFF SET Press and hold for approximately 10 seconds to show temperature setting in °C or °F. To switch between powerful & quiet (Remote control display) POWERFUL QUIET (NORMAL) CANCEL POWERFUL: To reach temperature quickly • This operation stops automatically after 20 minutes. qUIET: To enjoy quiet operation • This operation reduces airflow noise. FAN SPEED To select fan speed (Remote control display) • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. Press the button once to use in AUTO mode. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. Press and hold the button until you hear 2 beeps, then release to use in forced HEAT mode. To enjoy freshness and cleaner environment nanoe • This operation moisturizes your skin and hair, reduces odor and inactivation of allergic particulars such as pollen in the room. MILD DRY To set the timer 2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset times. 1 ON TIMER OFF CANCEL 2 3 SET Single Cancel Multi 2 Set the time 3 Confirm AIR SWING To adjust airflow direction SET (Remote control display) TIMER • To cancel ON or OFF timer, press or to select respective or then press . € If timer is cancelled manually or due to power failure, you can restore the timer again by pressing or to select respective or then press . • The nearest timer setting will be displayed and will activate in sequence. € When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. € Timer operation is based on the clock set in the remote control and repeats daily once set. € In HEAT mode, if AUTO is set, the horizontal louver is fixed at the predetermined position. The vertical louver swings left/right after the temperature rises. [. . . ] Indoor fan stops occasionally during heating operation. POWER indicator blinks before the unit is switched • This is a preliminary step in preparation for the operation when the ON timer has been set. € Changes of temperature caused the expansion/contraction Cracking sound during operation. € Due to air circulation or static electricity generated by the Dusts accumulated on the wall. [. . . ]