User manual PANASONIC CS-Z7SKEW

[. . . ] Before operating the unit, please read these operating instructions thoroughly and keep them for future reference. 62-73 ACXF55-01470 Nederlands Italiano Deutsch Español Français English Provide maximum comfort, clean air and optimise energy saving ECONAVI + INVERTER The Perfect Energy Saving Technology ECONAVI detects where energy is normally wasted and adjusts cooling/heating power depending on room conditions and activity levels. Nanoe For a freshness and cleaner environment nanoe generates negative ions using the air in the room to give a healthy air. It also provides moisturizing effect on the skin or hair and reduces the smell in the room and constrains propagations of mold and bacteria. [. . . ] ) This appliance shall be stored in a well ventilated area. This appliance shall be stored in a room without continuously operating open flames and ignition sources. This appliance shall be stored so as to prevent mechanical damage from occurring. 6 Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. do not use rechargeable (Ni-Cd) batteries. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. € New batteries of the same type must be inserted following the polarity stated. Power supply Do not disconnect the plug by pulling the cord to prevent electric shock. Safety precautions Remote control English 7 How to use To optimise energy saving ECONAVI MODE Sunlight sensor and remote control receiver Human activity sensor Indicator POWER TIMER ECONAVI To select operation mode AUTO - For your convenience HEAT - To enjoy warm air COOL - To enjoy cool air DRY - To dehumidify the environment SLEEP To maximise comfort while sleeping (CANCEL) Remote control display nanoe (White) (White) (White) (White) • This operation provides you with a comfortable environment while sleeping. It will automatically adjust the sleep pattern temperature during the activation period. € The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator brightness has been manually dimmed. € This operation can be set together with single timer or twin timer. Sleep operation has the priority over OFF timer. € This operation can be cancelled by pressing the respective button when the sleep timer reaches 0. OFF/ON MODE MILD DRY TEMP SLEEP AIR SWING FAN SPEED ON TIMER OFF SET Press and hold for approximately 10 seconds to show temperature setting in °C or °F. To switch between powerful & quiet (Remote control display) POWERFUL QUIET (NORMAL) CANCEL POWERFUL: To reach temperature quickly • This operation stops automatically after 20 minutes. qUIET: To enjoy quiet operation • This operation reduces airflow noise. FAN SPEED To select fan speed (Remote control display) • For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. Press the button once to use in AUTO mode. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. [. . . ] POWER indicator blinks before the unit is switched • This is a preliminary step in preparation for the operation when the ON timer has been set. € Changes of temperature caused the expansion/contraction Cracking sound during operation. € Due to air circulation or static electricity generated by the Dusts accumulated on the wall. Some types of wall paper may collect dusts easily (recommended to clean the area around the air conditioner frequently). [. . . ]