User manual PANASONIC CT-32SL14

[. . . ] The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. The Class II insulation symbol (square within a square) indicates that this product has been evaluated and tested to comply with Class II insulation requirements. install in accordance with the manufacturer's instructions. [. . . ] Note: Each time you press the VOL button, make sure that the component key blinks twice before pressing the POWER button. It may take many attempts before the correct code is found. If you miss a code, press VOL, then press the The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model. Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control. Together, for at least 5 After 5 seconds, the illuminated mode (component) buttons will begin to flash. Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons). If the procedure was successful, the component will turn on and the component key will blink twice and then go out. If the component does not operate with the Remote Control, repeat steps 3 through 6 using another code (some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail. This procedure searches all codes and is called the "sequence method. Together, for at least 5 After 5 seconds, the illuminated mode (component) buttons will begin to flash. (It does not block relevant parts of the picture). OTHER ADJUSTMENTS AUTO POWER ON - Select SET to power up the TV at the same time as the Cable box or other components. when this feature is On , Timer functions will be disabled. CHAN BANNER - Select ON to display onscreen banner with channel information and program rating when changing channels or pressing RECALL button. Note: Use Remote numeric keypad to enter channel numbers in Manual Program sub menu. GEOMAGNETIC CORR - This feature is used to adjust discoloration of the picture due to earth's magnetic field in the area. It allows the viewer to read the dialogue of a television program or other information. TILT CORRECTION - This feature is used to adjust tilt of the picture due to earth's magnetic field in the area. [. . . ] This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold "as is". a purchase receipt or other proof of the original purchase date is required for warranty service. Carry-in or In-Home Service For Carry-In or In-Home Service (as applicable) in the United States call 1-800-211-PANA(7262) or visit Panasonic Web Site: http://www. [. . . ]