User manual PANASONIC CU2RE18SBE

[. . . ] Before operating the unit, please read these operating instructions thoroughly and keep them for future reference. Español Français English For Z, XZ, MZ indoor unit Provide maximum comfort, clean air and optimise energy saving ECONAVI + INVERTER The Perfect Energy Saving Technology ECONAVI detects where energy is normally wasted and adjusts cooling/heating power depending on room conditions and activity levels. Nanoe For a freshness and cleaner environment nanoe generates negative ions using the air in the room to give a healthy air. It also provides moisturizing effect on the skin or hair and reduces the smell in the room and constrains propagations of mold and bacteria. [. . . ] € In HEAT mode, if AUTO is set, the horizontal louver is fixed at the predetermined position. The vertical louver swings left/right after the temperature rises. sET TIMER • To cancel ON or OFF timer , press or to select respective or then press . Temperature 10 Sunlight Sensor operation ECONAVI ; Detecting sunlight intensity, the unit adjust temperature to save energy. ECONAVI is activated, the unit maintains set Ambient condition temperature until a high Mode sunlight intensity is detected. The sunlight sensor detects +1 °C COOL/DRY sunlight intensity during Set weather or day/night temperature changes, and the unit adjusts HEAT -1 °C -1 °C temperature. € In a room without window or with thick curtain, the sunlight sensor will judge as cloudy/night. The human activity sensor will also scan for area of heat source and movement in a room. € Based on area activeness horizontal airflow direction louver will adjust either fix at predetermined position or swing left/right periodically. € The human activity sensor performance is influenced by indoor unit location, movement speed, temperature range, etc. € The human activity sensor may: - mistakenly detect an object with heat source & movement similar to human, such as pets, etc. - mistakenly detect as non-heat source & movement if a human stays motionless for certain period of time. € Do not place large objects near the sensor and keep away heating units or humidifier from the sensor’s detection area. Detection area English How to use (Remote control display) POWERFUL QUIET For TZ, MTZ indoor unit Multi Multi split system To switch between powerful & quiet (NORMAL) POWERFUL: To reach temperature quickly • This operation stops automatically after 20 minutes. qUIET: To enjoy quiet operation • This operation reduces airflow noise. MODE Press and hold for approximately 10 seconds to show temperature setting in °C or °F. Remote control receiver and indicator POWER (Green) TIMER (Orange) Remote control display To select operation mode AUTO mode - For your convenience • During operation mode selection, the power indicator will blinks at initial. € Unit selects operation mode every 3 hours Multi according to setting temperature, outdoor temperature and room temperature. HEAT mode - To enjoy warm air • Unit takes a while to warm up. The power indicator will blinks at initial during this operation. COOL mode - To enjoy cool air • To reduce power consumption during COOL mode, use curtains to screen off sunlight and outdoor heat. DRY mode - To dehumidify the environment • Unit operates at low fan speed to give a gentle cooling operation. [. . . ] € Make sure the receiver is not obstructed. € Certain fluorescent lights may interfere with signal transmitter. Check NON SERVICEABLE CRITERIAS 16 TURN OFF POWER SUPPLY AND UNPLUG then please consult authorised dealer under the following conditions: • Abnormal noise during operation. € Water/foreign particles have entered the remote control. [. . . ]